On Fri, 2008-04-11 at 17:03 -0400, Andy Walls wrote:
> Scott wrote:
>
> > I have followed the instructions at
> > http://marc.info/?l=linux-video&m=119834005505084&w=2
> >
> > and i get invalid EEPROM errors in the dmesg
>
> This is probably a problem with driving the I2C bus on the board, which
> a number of users are experiencing. The problem manifestation appears
> to be dependent on the system the card is installed in.
>
> There has been some discussion on the ivtv-devel list. To make the cx18
> driver work for all systems reliably, it would help if we can start to
> understand why it fails for some people. (I can't reproduce the problem
> on my system).
>
> I think the problem is PCI bus related (my opinion), so a work around
> for the problem outside of the cx18 driver could involve PCI bus latency
> timer configuration or removing devices or drivers that make heavy use
> of the PCI bus.
>
> In addition to the dmesg output you provided, can you provide the output
> of the following as root:
>
> # lspci -tv
> # lspci -vvvxxx
> # lsmod
>
>
> Also, if you can experiment with running your system (text mode if
> necessary) without the modules for the NVidia card and/or the Gigabit
> Ethernet card loaded, and see if you can modprobe cx18 with different
> results.
>
> >
> > /dev/video0 does not exist after a modprobe cx18
> >
> >
> > modprobe tveeprom debug=1
> > modprobe ivtv newi2c=1
> >
> > [83546.876646] ivtv: Start initialization, version 1.2.0
> > [83546.877594] ivtv: End initialization
>
> newi2c doesn't apply to cx18. What are you trying to convey here with
> ivtv? Do you have an ivtv supported CX23415/6 card?
>
> -Andy
>
> > i would appreciate any help so i can get this thing working.
> >
> > -Scott
> >
> >
> > dmesg
> > [ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc
> > version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue
> > Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fc0000 (usable)
> > [ 0.000000] BIOS-e820: 0000000017fc0000 - 0000000017ff8000 (ACPI data)
> > [ 0.000000] BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS)
> > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> > [ 0.000000] 0MB HIGHMEM available.
> > [ 0.000000] 383MB LOWMEM available.
> > [ 0.000000] Entering add_active_range(0, 0, 98240) 0 entries of 256 used
> > [ 0.000000] Zone PFN ranges:
> > [ 0.000000] DMA 0 -> 4096
> > [ 0.000000] Normal 4096 -> 98240
> > [ 0.000000] HighMem 98240 -> 98240
> > [ 0.000000] early_node_map[1] active PFN ranges
> > [ 0.000000] 0: 0 -> 98240
> > [ 0.000000] On node 0 totalpages: 98240
> > [ 0.000000] DMA zone: 32 pages used for memmap
> > [ 0.000000] DMA zone: 0 pages reserved
> > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> > [ 0.000000] Normal zone: 735 pages used for memmap
> > [ 0.000000] Normal zone: 93409 pages, LIFO batch:31
> > [ 0.000000] HighMem zone: 0 pages used for memmap
> > [ 0.000000] DMI 2.3 present.
> > [ 0.000000] ACPI: RSDP signature @ 0xC00FF980 checksum 0
> > [ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI )
> > [ 0.000000] ACPI: RSDT 17FF0000, 002C (r1 GATEWA N0CPP063 20010820
> > MSFT 1011)
> > [ 0.000000] ACPI: FACP 17FF1000, 0074 (r1 GATEWA N0CPP063 20010820
> > MSFT 1011)
> > [ 0.000000] ACPI: DSDT 17FE0000, 3189 (r1 GATEWA N0CPP063 4
> > MSFT 100000B)
> > [ 0.000000] ACPI: FACS 17FF8000, 0040
> > [ 0.000000] ACPI: SSDT 17FE3189, 0035 (r1 GATEWA N0CPP063 1
> > MSFT 100000B)
> > [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> > [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
> > 18000000:e6c00000)
> > [ 0.000000] Built 1 zonelists. Total pages: 97473
> > [ 0.000000] Kernel command line:
> > root=UUID=be1f9796-aca7-4102-9e75-729c87f81745 ro quiet splash
> > [ 0.000000] Found and enabled local APIC!
> > [ 0.000000] mapped APIC to ffffd000 (fee00000)
> > [ 0.000000] Enabling fast FPU save and restore... done.
> > [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> > [ 0.000000] Initializing CPU#0
> > [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
> > [ 0.000000] Detected 1496.436 MHz processor.
> > [ 16.635721] Console: colour VGA+ 80x25
> > [ 16.636078] Dentry cache hash table entries: 65536 (order: 6, 262144
> > bytes)
> > [ 16.636479] Inode-cache hash table entries: 32768 (order: 5, 131072
> > bytes)
> > [ 16.651498] Memory: 377868k/392960k available (2015k kernel code,
> > 14560k reserved, 915k data, 364k init, 0k highmem)
> > [ 16.651516] virtual kernel memory layout:
> > [ 16.651518] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
> > [ 16.651520] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> > [ 16.651522] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
> > [ 16.651524] lowmem : 0xc0000000 - 0xd7fc0000 ( 383 MB)
> > [ 16.651526] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
> > [ 16.651528] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
> > [ 16.651530] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
> > [ 16.651535] Checking if this processor honours the WP bit even in
> > supervisor mode... Ok.
> > [ 16.651598] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
> > CPUs=1, Nodes=1
> > [ 16.731593] Calibrating delay using timer specific routine.. 2996.19
> > BogoMIPS (lpj=5992381)
> > [ 16.731634] Security Framework v1.0.0 initialized
> > [ 16.731645] SELinux: Disabled at boot.
> > [ 16.731667] Mount-cache hash table entries: 512
> > [ 16.731899] CPU: After generic identify, caps: 3febfbff 00000000
> > 00000000 00000000 00000000 00000000 00000000
> > [ 16.731924] CPU: Trace cache: 12K uops, L1 D cache: 8K
> > [ 16.731929] CPU: L2 cache: 256K
> > [ 16.731934] CPU: Hyper-Threading is disabled
> > [ 16.731938] CPU: After all inits, caps: 3febfbff 00000000 00000000
> > 0000b080 00000000 00000000 00000000
> > [ 16.731959] Compat vDSO mapped to ffffe000.
> > [ 16.731981] Checking 'hlt' instruction... OK.
> > [ 16.751841] SMP alternatives: switching to UP code
> > [ 16.752229] Freeing SMP alternatives: 11k freed
> > [ 16.752801] Early unpacking initramfs... done
> > [ 17.332384] ACPI: Core revision 20070126
> > [ 17.332465] ACPI: Looking for DSDT in initramfs... error, file
> > /DSDT.aml not found.
> > [ 17.335024] ACPI: setting ELCR to 0200 (from 0e20)
> > [ 17.335815] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
> > [ 17.335825] SMP motherboard not detected.
> > [ 17.339850] Uhhuh. NMI received for unknown reason 2d on CPU 0.
> > [ 17.339916] Do you have a strange power saving mode enabled?
> > [ 17.339975] Dazed and confused, but trying to continue
> > [ 17.443362] Brought up 1 CPUs
> > [ 17.443577] Booting paravirtualized kernel on bare hardware
> > [ 17.443675] Time: 3:06:22 Date: 03/10/108
> > [ 17.443714] NET: Registered protocol family 16
> > [ 17.443889] EISA bus registered
> > [ 17.443910] ACPI: bus type pci registered
> > [ 17.444072] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
> > [ 17.444076] PCI: Using configuration type 1
> > [ 17.444079] Setting up standard PCI resources
> > [ 17.446690] ACPI: EC: Look up EC in DSDT
> > [ 17.452981] ACPI: Interpreter enabled
> > [ 17.452991] ACPI: (supports S0 S1 S3 S4 S5)
> > [ 17.453027] ACPI: Using PIC for interrupt routing
> > [ 17.461555] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > [ 17.461589] PCI: Probing PCI hardware (bus 00)
> > [ 17.461898] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
> > [ 17.461905] PCI quirk: region 0500-053f claimed by ICH4 GPIO
> > [ 17.462679] PCI: Transparent bridge - 0000:00:1e.0
> > [ 17.462723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > [ 17.462908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> > [ 17.465214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11
> > 12 14 15) *0, disabled.
> > [ 17.465413] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11
> > 12 14 15)
> > [ 17.465604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11
> > 12 14 15) *0, disabled.
> > [ 17.465796] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11
> > 12 14 15)
> > [ 17.465988] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11
> > 12 14 15) *0, disabled.
> > [ 17.466181] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11
> > 12 14 15)
> > [ 17.466372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11
> > 12 14 15) *0, disabled.
> > [ 17.466565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11
> > 12 14 15)
> > [ 17.466814] ACPI: Power Resource [FDDP] (off)
> > [ 17.466878] ACPI: Power Resource [URP1] (off)
> > [ 17.466940] ACPI: Power Resource [LPTP] (off)
> > [ 17.466966] Linux Plug and Play Support v0.97 (c) Adam Belay
> > [ 17.466989] pnp: PnP ACPI init
> > [ 17.467008] ACPI: bus type pnp registered
> > [ 17.471564] pnp: PnP ACPI: found 12 devices
> > [ 17.471570] ACPI: ACPI bus type pnp unregistered
> > [ 17.471578] PnPBIOS: Disabled by ACPI PNP
> > [ 17.471677] PCI: Using ACPI for IRQ routing
> > [ 17.471683] PCI: If a device doesn't work, try "pci=routeirq". If it
> > helps, post a report
> > [ 17.475734] NET: Registered protocol family 8
> > [ 17.475739] NET: Registered protocol family 20
> > [ 17.475898] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
> > [ 17.475905] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
> > [ 17.475910] pnp: 00:0b: iomem range 0x100000-0x17ffffff could not be
> > reserved
> > [ 17.475914] pnp: 00:0b: iomem range 0x0-0x0 could not be reserved
> > [ 17.479289] Time: tsc clocksource has been installed.
> > [ 17.506555] PCI: Bridge: 0000:00:01.0
> > [ 17.506559] IO window: disabled.
> > [ 17.506567] MEM window: f4800000-f48fffff
> > [ 17.506573] PREFETCH window: dc500000-dc5fffff
> > [ 17.506584] PCI: Bridge: 0000:00:1e.0
> > [ 17.506589] IO window: d000-dfff
> > [ 17.506597] MEM window: f4900000-feafffff
> > [ 17.506604] PREFETCH window: dc600000-ec6fffff
> > [ 17.506628] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> > [ 17.506652] NET: Registered protocol family 2
> > [ 17.543327] IP route cache hash table entries: 4096 (order: 2, 16384
> > bytes)
> > [ 17.543399] TCP established hash table entries: 16384 (order: 5,
> > 196608 bytes)
> > [ 17.543572] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> > [ 17.543723] TCP: Hash tables configured (established 16384 bind 16384)
> > [ 17.543729] TCP reno registered
> > [ 17.555522] checking if image is initramfs...<6>Switched to high
> > resolution mode on CPU 0
> > [ 18.102244] it is
> > [ 18.696892] Freeing initrd memory: 7212k freed
> > [ 18.697434] audit: initializing netlink socket (disabled)
> > [ 18.697453] audit(1207796782.724:1): initialized
> > [ 18.701644] VFS: Disk quotas dquot_6.5.1
> > [ 18.701766] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > [ 18.701960] io scheduler noop registered
> > [ 18.701965] io scheduler anticipatory registered
> > [ 18.701968] io scheduler deadline registered
> > [ 18.702006] io scheduler cfq registered (default)
> > [ 18.702066] Boot video device is 0000:02:09.0
> > [ 18.702371] isapnp: Scanning for PnP cards...
> > [ 19.059125] isapnp: No Plug & Play device found
> > [ 19.149575] Real Time Clock Driver v1.12ac
> > [ 19.149734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> > sharing enabled
> > [ 19.149860] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > [ 19.152023] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > [ 19.153667] RAMDISK driver initialized: 16 RAM disks of 65536K size
> > 1024 blocksize
> > [ 19.154079] input: Macintosh mouse button emulation as
> > /class/input/input0
> > [ 19.154262] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
> > 0x60,0x64 irq 1,12
> > [ 19.158105] serio: i8042 KBD port at 0x60,0x64 irq 1
> > [ 19.158117] serio: i8042 AUX port at 0x60,0x64 irq 12
> > [ 19.158532] mice: PS/2 mouse device common for all mice
> > [ 19.158764] EISA: Probing bus 0 at eisa.0
> > [ 19.158811] EISA: Detected 0 cards.
> > [ 19.158974] TCP cubic registered
> > [ 19.158999] NET: Registered protocol family 1
> > [ 19.159120] Testing NMI watchdog ... CPU#0: NMI appears to be stuck
> > (2->2)!
> > [ 19.238872] Using IPI No-Shortcut mode
> > [ 19.239150] Magic number: 4:118:108
> > [ 19.239939] Freeing unused kernel memory: 364k freed
> > [ 19.298498] input: AT Translated Set 2 keyboard as /class/input/input1
> > [ 20.630951] AppArmor: AppArmor
> > initialized<5>audit(1207796784.724:2): type=1505 info="AppArmor
> > initialized" pid=1108
> > [ 20.647569] fuse init (API version 7.8)
> > [ 20.658973] Failure registering capabilities with primary security
> > module.
> > [ 21.826870] SCSI subsystem initialized
> > [ 21.837904] libata version 2.21 loaded.
> > [ 21.844642] ata_piix 0000:00:1f.1: version 2.11
> > [ 21.844719] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> > [ 21.844851] scsi0 : ata_piix
> > [ 21.844942] scsi1 : ata_piix
> > [ 21.845143] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6
> > bmdma 0x0001ffa0 irq 14
> > [ 21.845149] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
> > bmdma 0x0001ffa8 irq 15
> > [ 21.868979] usbcore: registered new interface driver usbfs
> > [ 21.869026] usbcore: registered new interface driver hub
> > [ 21.869080] usbcore: registered new device driver usb
> > [ 21.870890] USB Universal Host Controller Interface driver v3.0
> > [ 22.010693] ata1.00: ATA-6: WDC WD1200JB-00GVA0, 08.02D08, max UDMA/100
> > [ 22.010701] ata1.00: 234441648 sectors, multi 16: LBA48
> > [ 22.026687] ata1.00: configured for UDMA/100
> > [ 22.154988] Floppy drive(s): fd0 is 1.44M
> > [ 22.226289] FDC 0 is a post-1991 82077
> > [ 22.345163] ata2.00: ATAPI: HITACHI DVD-ROM GD-8000, 0008, max UDMA/66
> > [ 22.345177] ata2.00: limited to UDMA/33 due to 40-wire cable
> > [ 22.517077] ata2.00: configured for UDMA/33
> > [ 22.517278] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00G
> > 08.0 PQ: 0 ANSI: 5
> > [ 22.523564] scsi 1:0:0:0: CD-ROM HITACHI DVD-ROM GD-8000
> > 0008 PQ: 0 ANSI: 5
> > [ 22.524131] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
> > [ 22.524138] PCI: setting IRQ 5 as level-triggered
> > [ 22.524144] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI
> > 5 (level, low) -> IRQ 5
> > [ 22.524163] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> > [ 22.524169] uhci_hcd 0000:00:1f.2: UHCI Host Controller
> > [ 22.524420] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
> > bus number 1
> > [ 22.524458] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000ef40
> > [ 22.524681] usb usb1: configuration #1 chosen from 1 choice
> > [ 22.524737] hub 1-0:1.0: USB hub found
> > [ 22.524750] hub 1-0:1.0: 2 ports detected
> > [ 22.556703] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors
> > (120034 MB)
> > [ 22.556748] sd 0:0:0:0: [sda] Write Protect is off
> > [ 22.556753] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 22.556786] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> > enabled, doesn't support DPO or FUA
> > [ 22.556938] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors
> > (120034 MB)
> > [ 22.556959] sd 0:0:0:0: [sda] Write Protect is off
> > [ 22.556963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 22.556995] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> > enabled, doesn't support DPO or FUA
> > [ 22.557005] sda: sda1 sda2 < sda5 >
> > [ 22.601056] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 22.610008] sd 0:0:0:0: Attached scsi generic sg0 type 0
> > [ 22.610354] sr 1:0:0:0: Attached scsi generic sg1 type 5
> > [ 22.625331] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
> > [ 22.625339] PCI: setting IRQ 9 as level-triggered
> > [ 22.625344] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI
> > 9 (level, low) -> IRQ 9
> > [ 22.625363] PCI: Setting latency timer of device 0000:00:1f.4 to 64
> > [ 22.625369] uhci_hcd 0000:00:1f.4: UHCI Host Controller
> > [ 22.625422] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned
> > bus number 2
> > [ 22.625457] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80
> > [ 22.625634] usb usb2: configuration #1 chosen from 1 choice
> > [ 22.625693] hub 2-0:1.0: USB hub found
> > [ 22.625707] hub 2-0:1.0: 2 ports detected
> > [ 22.669255] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
> > [ 22.669264] Uniform CD-ROM driver Revision: 3.20
> > [ 22.669739] sr 1:0:0:0: Attached scsi CD-ROM sr0
> > [ 22.729068] r8169 Gigabit Ethernet driver 2.2LK loaded
> > [ 22.729375] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
> > [ 22.729417] PCI: setting IRQ 11 as level-triggered
> > [ 22.729423] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKF] -> GSI
> > 11 (level, low) -> IRQ 11
> > [ 22.729658] eth0: RTL8110s at 0xd8818c00, 00:06:4f:22:bf:6d, XID
> > 04000000 IRQ 11
> > [ 22.864688] usb 1-2: new low speed USB device using uhci_hcd and
> > address 2
> > [ 22.952134] Attempting manual resume
> > [ 22.952141] swsusp: Resume From Partition 8:5
> > [ 22.952144] PM: Checking swsusp image.
> > [ 22.952378] PM: Resume from disk failed.
> > [ 23.010418] kjournald starting. Commit interval 5 seconds
> > [ 23.010442] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 23.038378] usb 1-2: configuration #1 chosen from 1 choice
> > [ 29.664951] iTCO_vendor_support: vendor-support=0
> > [ 29.666781] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
> > [ 29.666923] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460)
> > [ 29.667000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> > [ 29.682804] intel_rng: Firmware space is locked read-only.
> > <4>intel_rng: If you can't or
> > [ 29.682809] don't want to <4>intel_rng: disable this in firmware
> > setup, and <4>intel_rng: if
> > [ 29.682813] you are certain that your <4>intel_rng: system has a
> > functional
> > [ 29.682815] RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
> > [ 29.756843] Linux agpgart interface v0.102 (c) Dave Jones
> > [ 29.760834] agpgart: Detected an Intel i850 Chipset.
> > [ 29.765079] agpgart: AGP aperture is 64M @ 0xf0000000
> > [ 29.937288] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > [ 30.045342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> > [ 31.006564] input: PC Speaker as /class/input/input2
> > [ 31.383385] Linux video capture interface: v2.00
> > [ 31.476180] cx18: Start initialization, version 0.1.0
> > [ 31.476281] cx18-0: Initializing card #0
> > [ 31.476287] cx18-0: Autodetected Hauppauge card
> > [ 31.476319] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKH] -> GSI
> > 9 (level, low) -> IRQ 9
> > [ 31.476337] cx18-0: Unreasonably low latency timer, setting to 64
> > (was 32)
> > [ 31.476602] cx18-0: cx23418 revision 01010000 (B)
> > [ 31.605258] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
> > [ 31.605267] tveeprom 0-0050: Encountered bad packet header [07].
> > Corrupt or not a Hauppauge eeprom.
> > [ 31.605272] cx18-0: Invalid EEPROM
> > [ 31.811053] input: PS/2 Generic Mouse as /class/input/input3
> > [ 31.813909] parport_pc 00:09: reported by Plug and Play ACPI
> > [ 31.813970] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> > [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> > [ 31.941505] tuner 1-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
> > [ 31.941547] tda9887 1-0043: creating new instancels
> > /lib/firmware/2.6.22-14-generic/ | grep cx23418
> > v4l-cx23418-apu.fw
> > v4l-cx23418-cpu.fw
> > v4l-cx23418-dig.fw
> >
> > [ 31.941551] tda9887 1-0043: tda988[5/6/7] found
> > [ 32.009093] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
> > [ 32.009161] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
> > [ 32.022452] lirc_dev: IR Remote Control driver registered, at major 61
> > [ 32.033051]
> > [ 32.033054] lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $
> > [ 32.033059] lirc_atiusb: Paul Miller <[EMAIL PROTECTED]>
> > [ 32.037317] lirc_dev: lirc_register_plugin: sample_rate: 0
> > [ 32.058023] lirc_atiusb[2]: X10 WTI RF receiver on usb1:2
> > [ 32.067209] usbcore: registered new interface driver lirc_atiusb
> > [ 32.138843] nvidia: module license 'NVIDIA' taints kernel.
> > [ 32.245940] cx18-0: Disabled encoder IDX device
> > [ 32.246076] cx18-0: Registered device video0 for encoder MPEG (2 MB)
> > [ 32.246081] cx18_dvb_register()
> > [ 32.246085] DVB: registering new adapter (cx18)
> > [ 32.536068] s5h1409_readreg: readreg error (ret == -121)
> > [ 32.536155] cx18: frontend initialization failed
> > [ 32.536480] cx18-0: DVB failed to register
> > [ 32.536572] cx18-0: Registered device video32 for encoder YUV (2 MB)
> > [ 32.536635] cx18-0: Registered device vbi0 for encoder VBI (1 MB)
> > [ 32.536707] cx18-0: Registered device video24 for encoder PCM audio
> > (1 MB)
> > [ 32.536768] cx18-0: Registered device radio0 for encoder radio
> > [ 32.537246] cx18-0: Error -12 registering devices
> > [ 32.537719] tda9887 1-0043: destroying instance
> > [ 32.539445] cx18-0: Error -12 on initialization
> > [ 32.539458] cx18: probe of 0000:02:0b.0 failed with error -12
Ack I missed this. -12 is -ENOMEM. You may need to add a line similar
to the following to /etc/sysctl.conf:
vm.min_free_kbytes = 16384
To get rid of the ENOMEM problem.
That still won't fix the I2C problem that gives you the EEPROM messages
(-121 is -EREMOTEIO, refering to the remote I2C on the HVR-1600).
-Andy
> > [ 32.539494] cx18: End initialization
> > [ 32.540105] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI
> > 11 (level, low) -> IRQ 11
> > [ 32.540454] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-7185
> > Mon Apr 2 18:29:54 PDT 2007
> > [ 32.907378] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> > [ 32.907387] PCI: setting IRQ 10 as level-triggered
> > [ 32.907392] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI
> > 10 (level, low) -> IRQ 10
> > [ 32.907431] Vortex: init.... <6>done.
> > [ 33.659993] gameport: AU88x0 Gameport is pci0000:02:0c.0/gameport0,
> > speed 1084kHz
> > [ 34.359572] lp0: using parport0 (interrupt-driven).
> > [ 34.620901] Adding 1124508k swap on /dev/sda5. Priority:-1 extents:1
> > across:1124508k
> > [ 35.026225] EXT3 FS on sda1, internal journal
> > [ 38.477886] input: Power Button (FF) as /class/input/input4
> > [ 38.484772] ACPI: Power Button (FF) [PWRF]
> > [ 38.546728] input: Sleep Button (CM) as /class/input/input5
> > [ 38.553464] ACPI: Sleep Button (CM) [SBTN]
> > [ 38.604662] No dock devices found.
> > [ 43.373239] r8169: eth0: link up
> > [ 43.891724] NET: Registered protocol family 10
> > [ 43.892038] lo: Disabled Privacy Extensions
> > [ 58.344722] NET: Registered protocol family 17
> > [ 72.156210] eth0: no IPv6 routers present
> >
> >
> > ls /lib/firmware/2.6.22-14-generic/ | grep cx23418
> > v4l-cx23418-apu.fw
> > v4l-cx23418-cpu.fw
> > v4l-cx23418-dig.fw
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
