Andy,
I have the following pci devices,
nvidia vga card fx5500
audio card
tv tuner
ethernet
the motherboard has no onboard video sound or ethernet, at the most i
could get rid of the sound and ethernet, but im afraid that card that
uses the most of the pci bus is the graphics card.
when i boot up into recovery mode which is hopefully runlevel 2, i
tried to modprobe cx18 and checked for video0 in /dev/ and it was
nonexistant still.
i havent removed any of the pci cards because the computer is useless
without them.
i hope this helps.
lspci -tv
-----------------------
-[0000:00]-+-00.0 Intel Corporation 82850 850 (Tehama) Chipset Host
Bridge (MCH)
+-01.0-[0000:01]--
+-1e.0-[0000:02]--+-09.0 nVidia Corporation NV34 [GeForce FX
5500]
| +-0b.0 Conexant CX23418 Single-Chip MPEG-2
Encoder with Integrated Analog Video/Broadcast Audio Decoder
| +-0c.0 Aureal Semiconductor Vortex 2
| \-0d.0 Realtek Semiconductor Co., Ltd.
RTL-8169 Gigabit Ethernet
+-1f.0 Intel Corporation 82801BA ISA Bridge (LPC)
+-1f.1 Intel Corporation 82801BA IDE U100 Controller
+-1f.2 Intel Corporation 82801BA/BAM USB Controller #1
+-1f.3 Intel Corporation 82801BA/BAM SMBus Controller
\-1f.4 Intel Corporation 82801BA/BAM USB Controller #1
lspci -vvvxxx
-----------------------------
00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host
Bridge (MCH) (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00: 86 80 30 25 06 01 90 20 02 00 00 06 00 00 00 00
10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: d4 92 80 80 80 80 80 80 80 80 80 80 80 80 80 80
50: 05 0a 02 00 00 00 00 00 00 10 11 11 00 00 11 31
60: 10 00 18 08 18 08 18 08 18 08 18 08 18 08 18 08
70: 18 08 18 08 18 08 18 08 18 08 18 08 18 08 18 08
80: 00 00 00 00 00 00 00 00 0f 00 00 00 00 00 00 00
90: 07 00 07 00 61 00 01 08 55 19 00 00 80 0a 38 00
a0: 02 00 20 00 17 02 00 1f 00 00 00 00 00 00 00 00
b0: 00 00 00 00 30 00 00 00 00 00 3a 13 00 00 8a 00
c0: 44 40 50 11 00 18 00 00 00 c0 00 00 00 00 00 00
d0: 02 28 00 0e 03 00 00 33 af 09 31 b5 01 00 00 00
e0: 00 00 00 00 00 00 00 00 2e 23 31 23 07 00 00 00
f0: 00 00 01 00 74 f8 30 80 38 0f 00 00 00 00 00 00
00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP
Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f4800000-f48fffff
Prefetchable memory behind bridge: dc500000-dc5fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00: 86 80 32 25 06 01 a0 00 02 00 04 06 00 20 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 a0 22
20: 80 f4 80 f4 50 dc 50 dc 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f4900000-feafffff
Prefetchable memory behind bridge: dc600000-ec6fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00: 86 80 4e 24 07 01 80 00 04 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 02
20: 90 f4 a0 fe 60 dc 60 ec 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00
40: 00 28 20 20 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 11 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 10 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 01 00 02 00 03 00 c0 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 40 24 0f 00 80 02 04 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 02 00
50: 00 00 00 00 00 00 00 00 01 05 00 00 10 00 00 00
60: 80 0a 80 05 d0 00 00 00 80 0b 80 09 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 10 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00
c0: 00 00 00 00 00 00 84 08 00 00 00 00 10 00 00 00
d0: 04 20 00 00 02 0f 00 00 04 00 00 00 00 00 00 00
e0: 10 00 00 c0 01 08 0f 34 33 22 11 00 00 00 67 45
f0: 00 00 60 00 00 00 00 00 47 0f 00 00 00 00 00 02
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller
(rev 04) (prog-if 80 [Master])
Subsystem: Gateway 2000 Unknown device 0063
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3,
non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit,
non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3,
non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
00: 86 80 4b 24 05 00 80 02 04 80 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 7b 10 63 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 07 a3 03 a3 00 00 00 00 05 00 01 02 00 00 00 00
50: 00 00 00 00 50 14 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1
(rev 04) (prog-if 00 [UHCI])
Subsystem: Gateway 2000 Unknown device 0063
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at ef40 [size=32]
00: 86 80 42 24 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 ef 00 00 00 00 00 00 00 00 00 00 7b 10 63 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 03 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 04)
Subsystem: Gateway 2000 Unknown device 0063
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at efa0 [size=16]
00: 86 80 43 24 01 00 80 02 04 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ef 00 00 00 00 00 00 00 00 00 00 7b 10 63 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1
(rev 04) (prog-if 00 [UHCI])
Subsystem: Gateway 2000 Unknown device 0063
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at ef80 [size=32]
00: 86 80 44 24 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 ef 00 00 00 00 00 00 00 00 00 00 7b 10 63 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00
02:09.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX
5500] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at dc600000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 26 03 07 00 b0 02 a1 00 00 03 00 f8 00 00
10: 00 00 00 fd 08 00 00 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 00 00 00 00 02 00 30 00 17 02 00 1f 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:0b.0 Multimedia video controller: Conexant CX23418 Single-Chip MPEG-2
Encoder with Integrated Analog Video/Broadcast Audio Decoder
Subsystem: Hauppauge computer works Inc. Unknown device 7444
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 50000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: f1 14 7a 5b 16 01 90 02 00 00 00 04 04 40 00 00
10: 00 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 44 74
30: 00 00 00 00 44 00 00 00 00 00 00 00 09 01 02 c8
40: 7b 1f 00 01 03 4c 00 00 00 00 00 00 01 00 22 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:0c.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fa)
Subsystem: Voyetra Technologies Montego II
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 3000ns max), Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=256K]
Region 1: I/O ports at dff0 [size=8]
Region 2: I/O ports at dfe0 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: eb 12 02 00 07 01 90 02 fa 00 01 04 04 20 00 00
10: 00 00 a8 fe f1 df 00 00 e1 df 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 53 50 56 33
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 04 0c
40: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 04
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at feadfc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at dc620000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 69 81 17 01 b0 02 10 00 00 02 08 40 00 00
10: 01 d8 00 00 00 fc ad fe 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 69 81
30: 00 00 a6 fe dc 00 00 00 00 00 00 00 0b 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 f7
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lsmod
--------------------------
Module Size Used by
nfs 246124 1
lockd 67592 2 nfs
sunrpc 172412 3 nfs,lockd
af_packet 24840 2
ipv6 273892 16
container 5504 0
sbs 19592 0
ac 6148 0
dock 10656 0
video 18060 0
button 8976 0
battery 11012 0
lp 12580 0
snd_au8830 53556 1
gameport 16776 2 snd_au8830
snd_ac97_codec 100644 1 snd_au8830
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_au8830,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 1 snd_pcm
ac97_bus 3200 1 snd_ac97_codec
snd_mpu401_uart 9600 1 snd_au8830
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
s5h1409 10244 0
snd_seq_midi 9600 0
snd_rawmidi 25728 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 53232 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 2 snd_pcm,snd_seq
snd_seq_device 9228 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
lirc_atiusb 19360 0
nvidia 3932108 8
lirc_dev 15860 1 lirc_atiusb
parport_pc 37412 1
snd 54660 13
snd_au8830,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
cs5345 4948 0
tuner 27724 0
tea5767 8324 1 tuner
tda8290 14340 1 tuner
tda18271 33416 1 tda8290
tda827x 11396 1 tda8290
tuner_xc2028 22704 1 tuner
xc5000 11396 1 tuner
tda9887 11908 1 tuner
tuner_simple 16400 1 tuner
tuner_types 14976 1 tuner_simple
mt20xx 13704 1 tuner
tea5761 6276 1 tuner
parport 37448 2 lp,parport_pc
pcspkr 4224 0
serio_raw 8068 0
psmouse 39952 0
soundcore 8800 1 snd
cx18 91200 0
dvb_core 80796 1 cx18
i2c_algo_bit 7428 1 cx18
cx2341x 13572 1 cx18
v4l2_common 12672 4 cs5345,tuner,cx18,cx2341x
videodev 34560 2 tuner,cx18
v4l1_compat 16004 2 cx18,videodev
tveeprom 13572 1 cx18
i2c_core 26112 17
s5h1409,cs5345,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,cx18,i2c_algo_bit,v4l2_common,tveeprom
iTCO_wdt 11940 0
iTCO_vendor_support 4868 1 iTCO_wdt
shpchp 34580 0
pci_hotplug 32704 1 shpchp
intel_agp 25620 1
agpgart 35016 2 nvidia,intel_agp
evdev 11136 3
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
sr_mod 17828 0
cdrom 37536 1 sr_mod
sd_mod 30336 3
floppy 60004 0
uhci_hcd 26640 0
usbcore 138632 3 lirc_atiusb,uhci_hcd
ata_piix 17540 2
ata_generic 8452 0
libata 125168 2 ata_piix,ata_generic
scsi_mod 147084 4 sg,sr_mod,sd_mod,libata
r8169 32260 0
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
Andy Walls wrote:
> On Fri, 2008-04-11 at 17:03 -0400, Andy Walls wrote:
>
>> Scott wrote:
>>
>>
>>> I have followed the instructions at
>>> http://marc.info/?l=linux-video&m=119834005505084&w=2
>>>
>>> and i get invalid EEPROM errors in the dmesg
>>>
>> This is probably a problem with driving the I2C bus on the board, which
>> a number of users are experiencing. The problem manifestation appears
>> to be dependent on the system the card is installed in.
>>
>> There has been some discussion on the ivtv-devel list. To make the cx18
>> driver work for all systems reliably, it would help if we can start to
>> understand why it fails for some people. (I can't reproduce the problem
>> on my system).
>>
>> I think the problem is PCI bus related (my opinion), so a work around
>> for the problem outside of the cx18 driver could involve PCI bus latency
>> timer configuration or removing devices or drivers that make heavy use
>> of the PCI bus.
>>
>> In addition to the dmesg output you provided, can you provide the output
>> of the following as root:
>>
>> # lspci -tv
>> # lspci -vvvxxx
>> # lsmod
>>
>>
>> Also, if you can experiment with running your system (text mode if
>> necessary) without the modules for the NVidia card and/or the Gigabit
>> Ethernet card loaded, and see if you can modprobe cx18 with different
>> results.
>>
>>
>>> /dev/video0 does not exist after a modprobe cx18
>>>
>>>
>>> modprobe tveeprom debug=1
>>> modprobe ivtv newi2c=1
>>>
>>> [83546.876646] ivtv: Start initialization, version 1.2.0
>>> [83546.877594] ivtv: End initialization
>>>
>> newi2c doesn't apply to cx18. What are you trying to convey here with
>> ivtv? Do you have an ivtv supported CX23415/6 card?
>>
>> -Andy
>>
>>
>>> i would appreciate any help so i can get this thing working.
>>>
>>> -Scott
>>>
>>>
>>> dmesg
>>> [ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc
>>> version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue
>>> Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
>>> [ 0.000000] BIOS-provided physical RAM map:
>>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>>> [ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fc0000 (usable)
>>> [ 0.000000] BIOS-e820: 0000000017fc0000 - 0000000017ff8000 (ACPI data)
>>> [ 0.000000] BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS)
>>> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>>> [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
>>> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>>> [ 0.000000] 0MB HIGHMEM available.
>>> [ 0.000000] 383MB LOWMEM available.
>>> [ 0.000000] Entering add_active_range(0, 0, 98240) 0 entries of 256 used
>>> [ 0.000000] Zone PFN ranges:
>>> [ 0.000000] DMA 0 -> 4096
>>> [ 0.000000] Normal 4096 -> 98240
>>> [ 0.000000] HighMem 98240 -> 98240
>>> [ 0.000000] early_node_map[1] active PFN ranges
>>> [ 0.000000] 0: 0 -> 98240
>>> [ 0.000000] On node 0 totalpages: 98240
>>> [ 0.000000] DMA zone: 32 pages used for memmap
>>> [ 0.000000] DMA zone: 0 pages reserved
>>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
>>> [ 0.000000] Normal zone: 735 pages used for memmap
>>> [ 0.000000] Normal zone: 93409 pages, LIFO batch:31
>>> [ 0.000000] HighMem zone: 0 pages used for memmap
>>> [ 0.000000] DMI 2.3 present.
>>> [ 0.000000] ACPI: RSDP signature @ 0xC00FF980 checksum 0
>>> [ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI )
>>> [ 0.000000] ACPI: RSDT 17FF0000, 002C (r1 GATEWA N0CPP063 20010820
>>> MSFT 1011)
>>> [ 0.000000] ACPI: FACP 17FF1000, 0074 (r1 GATEWA N0CPP063 20010820
>>> MSFT 1011)
>>> [ 0.000000] ACPI: DSDT 17FE0000, 3189 (r1 GATEWA N0CPP063 4
>>> MSFT 100000B)
>>> [ 0.000000] ACPI: FACS 17FF8000, 0040
>>> [ 0.000000] ACPI: SSDT 17FE3189, 0035 (r1 GATEWA N0CPP063 1
>>> MSFT 100000B)
>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap:
>>> 18000000:e6c00000)
>>> [ 0.000000] Built 1 zonelists. Total pages: 97473
>>> [ 0.000000] Kernel command line:
>>> root=UUID=be1f9796-aca7-4102-9e75-729c87f81745 ro quiet splash
>>> [ 0.000000] Found and enabled local APIC!
>>> [ 0.000000] mapped APIC to ffffd000 (fee00000)
>>> [ 0.000000] Enabling fast FPU save and restore... done.
>>> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
>>> [ 0.000000] Initializing CPU#0
>>> [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
>>> [ 0.000000] Detected 1496.436 MHz processor.
>>> [ 16.635721] Console: colour VGA+ 80x25
>>> [ 16.636078] Dentry cache hash table entries: 65536 (order: 6, 262144
>>> bytes)
>>> [ 16.636479] Inode-cache hash table entries: 32768 (order: 5, 131072
>>> bytes)
>>> [ 16.651498] Memory: 377868k/392960k available (2015k kernel code,
>>> 14560k reserved, 915k data, 364k init, 0k highmem)
>>> [ 16.651516] virtual kernel memory layout:
>>> [ 16.651518] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
>>> [ 16.651520] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>>> [ 16.651522] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
>>> [ 16.651524] lowmem : 0xc0000000 - 0xd7fc0000 ( 383 MB)
>>> [ 16.651526] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
>>> [ 16.651528] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
>>> [ 16.651530] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
>>> [ 16.651535] Checking if this processor honours the WP bit even in
>>> supervisor mode... Ok.
>>> [ 16.651598] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
>>> CPUs=1, Nodes=1
>>> [ 16.731593] Calibrating delay using timer specific routine.. 2996.19
>>> BogoMIPS (lpj=5992381)
>>> [ 16.731634] Security Framework v1.0.0 initialized
>>> [ 16.731645] SELinux: Disabled at boot.
>>> [ 16.731667] Mount-cache hash table entries: 512
>>> [ 16.731899] CPU: After generic identify, caps: 3febfbff 00000000
>>> 00000000 00000000 00000000 00000000 00000000
>>> [ 16.731924] CPU: Trace cache: 12K uops, L1 D cache: 8K
>>> [ 16.731929] CPU: L2 cache: 256K
>>> [ 16.731934] CPU: Hyper-Threading is disabled
>>> [ 16.731938] CPU: After all inits, caps: 3febfbff 00000000 00000000
>>> 0000b080 00000000 00000000 00000000
>>> [ 16.731959] Compat vDSO mapped to ffffe000.
>>> [ 16.731981] Checking 'hlt' instruction... OK.
>>> [ 16.751841] SMP alternatives: switching to UP code
>>> [ 16.752229] Freeing SMP alternatives: 11k freed
>>> [ 16.752801] Early unpacking initramfs... done
>>> [ 17.332384] ACPI: Core revision 20070126
>>> [ 17.332465] ACPI: Looking for DSDT in initramfs... error, file
>>> /DSDT.aml not found.
>>> [ 17.335024] ACPI: setting ELCR to 0200 (from 0e20)
>>> [ 17.335815] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
>>> [ 17.335825] SMP motherboard not detected.
>>> [ 17.339850] Uhhuh. NMI received for unknown reason 2d on CPU 0.
>>> [ 17.339916] Do you have a strange power saving mode enabled?
>>> [ 17.339975] Dazed and confused, but trying to continue
>>> [ 17.443362] Brought up 1 CPUs
>>> [ 17.443577] Booting paravirtualized kernel on bare hardware
>>> [ 17.443675] Time: 3:06:22 Date: 03/10/108
>>> [ 17.443714] NET: Registered protocol family 16
>>> [ 17.443889] EISA bus registered
>>> [ 17.443910] ACPI: bus type pci registered
>>> [ 17.444072] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
>>> [ 17.444076] PCI: Using configuration type 1
>>> [ 17.444079] Setting up standard PCI resources
>>> [ 17.446690] ACPI: EC: Look up EC in DSDT
>>> [ 17.452981] ACPI: Interpreter enabled
>>> [ 17.452991] ACPI: (supports S0 S1 S3 S4 S5)
>>> [ 17.453027] ACPI: Using PIC for interrupt routing
>>> [ 17.461555] ACPI: PCI Root Bridge [PCI0] (0000:00)
>>> [ 17.461589] PCI: Probing PCI hardware (bus 00)
>>> [ 17.461898] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>>> [ 17.461905] PCI quirk: region 0500-053f claimed by ICH4 GPIO
>>> [ 17.462679] PCI: Transparent bridge - 0000:00:1e.0
>>> [ 17.462723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>>> [ 17.462908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>>> [ 17.465214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11
>>> 12 14 15) *0, disabled.
>>> [ 17.465413] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11
>>> 12 14 15)
>>> [ 17.465604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11
>>> 12 14 15) *0, disabled.
>>> [ 17.465796] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11
>>> 12 14 15)
>>> [ 17.465988] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11
>>> 12 14 15) *0, disabled.
>>> [ 17.466181] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11
>>> 12 14 15)
>>> [ 17.466372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11
>>> 12 14 15) *0, disabled.
>>> [ 17.466565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11
>>> 12 14 15)
>>> [ 17.466814] ACPI: Power Resource [FDDP] (off)
>>> [ 17.466878] ACPI: Power Resource [URP1] (off)
>>> [ 17.466940] ACPI: Power Resource [LPTP] (off)
>>> [ 17.466966] Linux Plug and Play Support v0.97 (c) Adam Belay
>>> [ 17.466989] pnp: PnP ACPI init
>>> [ 17.467008] ACPI: bus type pnp registered
>>> [ 17.471564] pnp: PnP ACPI: found 12 devices
>>> [ 17.471570] ACPI: ACPI bus type pnp unregistered
>>> [ 17.471578] PnPBIOS: Disabled by ACPI PNP
>>> [ 17.471677] PCI: Using ACPI for IRQ routing
>>> [ 17.471683] PCI: If a device doesn't work, try "pci=routeirq". If it
>>> helps, post a report
>>> [ 17.475734] NET: Registered protocol family 8
>>> [ 17.475739] NET: Registered protocol family 20
>>> [ 17.475898] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
>>> [ 17.475905] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
>>> [ 17.475910] pnp: 00:0b: iomem range 0x100000-0x17ffffff could not be
>>> reserved
>>> [ 17.475914] pnp: 00:0b: iomem range 0x0-0x0 could not be reserved
>>> [ 17.479289] Time: tsc clocksource has been installed.
>>> [ 17.506555] PCI: Bridge: 0000:00:01.0
>>> [ 17.506559] IO window: disabled.
>>> [ 17.506567] MEM window: f4800000-f48fffff
>>> [ 17.506573] PREFETCH window: dc500000-dc5fffff
>>> [ 17.506584] PCI: Bridge: 0000:00:1e.0
>>> [ 17.506589] IO window: d000-dfff
>>> [ 17.506597] MEM window: f4900000-feafffff
>>> [ 17.506604] PREFETCH window: dc600000-ec6fffff
>>> [ 17.506628] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>>> [ 17.506652] NET: Registered protocol family 2
>>> [ 17.543327] IP route cache hash table entries: 4096 (order: 2, 16384
>>> bytes)
>>> [ 17.543399] TCP established hash table entries: 16384 (order: 5,
>>> 196608 bytes)
>>> [ 17.543572] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>>> [ 17.543723] TCP: Hash tables configured (established 16384 bind 16384)
>>> [ 17.543729] TCP reno registered
>>> [ 17.555522] checking if image is initramfs...<6>Switched to high
>>> resolution mode on CPU 0
>>> [ 18.102244] it is
>>> [ 18.696892] Freeing initrd memory: 7212k freed
>>> [ 18.697434] audit: initializing netlink socket (disabled)
>>> [ 18.697453] audit(1207796782.724:1): initialized
>>> [ 18.701644] VFS: Disk quotas dquot_6.5.1
>>> [ 18.701766] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>> [ 18.701960] io scheduler noop registered
>>> [ 18.701965] io scheduler anticipatory registered
>>> [ 18.701968] io scheduler deadline registered
>>> [ 18.702006] io scheduler cfq registered (default)
>>> [ 18.702066] Boot video device is 0000:02:09.0
>>> [ 18.702371] isapnp: Scanning for PnP cards...
>>> [ 19.059125] isapnp: No Plug & Play device found
>>> [ 19.149575] Real Time Clock Driver v1.12ac
>>> [ 19.149734] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
>>> sharing enabled
>>> [ 19.149860] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>> [ 19.152023] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>> [ 19.153667] RAMDISK driver initialized: 16 RAM disks of 65536K size
>>> 1024 blocksize
>>> [ 19.154079] input: Macintosh mouse button emulation as
>>> /class/input/input0
>>> [ 19.154262] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
>>> 0x60,0x64 irq 1,12
>>> [ 19.158105] serio: i8042 KBD port at 0x60,0x64 irq 1
>>> [ 19.158117] serio: i8042 AUX port at 0x60,0x64 irq 12
>>> [ 19.158532] mice: PS/2 mouse device common for all mice
>>> [ 19.158764] EISA: Probing bus 0 at eisa.0
>>> [ 19.158811] EISA: Detected 0 cards.
>>> [ 19.158974] TCP cubic registered
>>> [ 19.158999] NET: Registered protocol family 1
>>> [ 19.159120] Testing NMI watchdog ... CPU#0: NMI appears to be stuck
>>> (2->2)!
>>> [ 19.238872] Using IPI No-Shortcut mode
>>> [ 19.239150] Magic number: 4:118:108
>>> [ 19.239939] Freeing unused kernel memory: 364k freed
>>> [ 19.298498] input: AT Translated Set 2 keyboard as /class/input/input1
>>> [ 20.630951] AppArmor: AppArmor
>>> initialized<5>audit(1207796784.724:2): type=1505 info="AppArmor
>>> initialized" pid=1108
>>> [ 20.647569] fuse init (API version 7.8)
>>> [ 20.658973] Failure registering capabilities with primary security
>>> module.
>>> [ 21.826870] SCSI subsystem initialized
>>> [ 21.837904] libata version 2.21 loaded.
>>> [ 21.844642] ata_piix 0000:00:1f.1: version 2.11
>>> [ 21.844719] PCI: Setting latency timer of device 0000:00:1f.1 to 64
>>> [ 21.844851] scsi0 : ata_piix
>>> [ 21.844942] scsi1 : ata_piix
>>> [ 21.845143] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6
>>> bmdma 0x0001ffa0 irq 14
>>> [ 21.845149] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376
>>> bmdma 0x0001ffa8 irq 15
>>> [ 21.868979] usbcore: registered new interface driver usbfs
>>> [ 21.869026] usbcore: registered new interface driver hub
>>> [ 21.869080] usbcore: registered new device driver usb
>>> [ 21.870890] USB Universal Host Controller Interface driver v3.0
>>> [ 22.010693] ata1.00: ATA-6: WDC WD1200JB-00GVA0, 08.02D08, max UDMA/100
>>> [ 22.010701] ata1.00: 234441648 sectors, multi 16: LBA48
>>> [ 22.026687] ata1.00: configured for UDMA/100
>>> [ 22.154988] Floppy drive(s): fd0 is 1.44M
>>> [ 22.226289] FDC 0 is a post-1991 82077
>>> [ 22.345163] ata2.00: ATAPI: HITACHI DVD-ROM GD-8000, 0008, max UDMA/66
>>> [ 22.345177] ata2.00: limited to UDMA/33 due to 40-wire cable
>>> [ 22.517077] ata2.00: configured for UDMA/33
>>> [ 22.517278] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00G
>>> 08.0 PQ: 0 ANSI: 5
>>> [ 22.523564] scsi 1:0:0:0: CD-ROM HITACHI DVD-ROM GD-8000
>>> 0008 PQ: 0 ANSI: 5
>>> [ 22.524131] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>>> [ 22.524138] PCI: setting IRQ 5 as level-triggered
>>> [ 22.524144] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI
>>> 5 (level, low) -> IRQ 5
>>> [ 22.524163] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>>> [ 22.524169] uhci_hcd 0000:00:1f.2: UHCI Host Controller
>>> [ 22.524420] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned
>>> bus number 1
>>> [ 22.524458] uhci_hcd 0000:00:1f.2: irq 5, io base 0x0000ef40
>>> [ 22.524681] usb usb1: configuration #1 chosen from 1 choice
>>> [ 22.524737] hub 1-0:1.0: USB hub found
>>> [ 22.524750] hub 1-0:1.0: 2 ports detected
>>> [ 22.556703] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors
>>> (120034 MB)
>>> [ 22.556748] sd 0:0:0:0: [sda] Write Protect is off
>>> [ 22.556753] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> [ 22.556786] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>>> enabled, doesn't support DPO or FUA
>>> [ 22.556938] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors
>>> (120034 MB)
>>> [ 22.556959] sd 0:0:0:0: [sda] Write Protect is off
>>> [ 22.556963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>>> [ 22.556995] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>>> enabled, doesn't support DPO or FUA
>>> [ 22.557005] sda: sda1 sda2 < sda5 >
>>> [ 22.601056] sd 0:0:0:0: [sda] Attached SCSI disk
>>> [ 22.610008] sd 0:0:0:0: Attached scsi generic sg0 type 0
>>> [ 22.610354] sr 1:0:0:0: Attached scsi generic sg1 type 5
>>> [ 22.625331] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
>>> [ 22.625339] PCI: setting IRQ 9 as level-triggered
>>> [ 22.625344] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI
>>> 9 (level, low) -> IRQ 9
>>> [ 22.625363] PCI: Setting latency timer of device 0000:00:1f.4 to 64
>>> [ 22.625369] uhci_hcd 0000:00:1f.4: UHCI Host Controller
>>> [ 22.625422] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned
>>> bus number 2
>>> [ 22.625457] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80
>>> [ 22.625634] usb usb2: configuration #1 chosen from 1 choice
>>> [ 22.625693] hub 2-0:1.0: USB hub found
>>> [ 22.625707] hub 2-0:1.0: 2 ports detected
>>> [ 22.669255] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
>>> [ 22.669264] Uniform CD-ROM driver Revision: 3.20
>>> [ 22.669739] sr 1:0:0:0: Attached scsi CD-ROM sr0
>>> [ 22.729068] r8169 Gigabit Ethernet driver 2.2LK loaded
>>> [ 22.729375] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>>> [ 22.729417] PCI: setting IRQ 11 as level-triggered
>>> [ 22.729423] ACPI: PCI Interrupt 0000:02:0d.0[A] -> Link [LNKF] -> GSI
>>> 11 (level, low) -> IRQ 11
>>> [ 22.729658] eth0: RTL8110s at 0xd8818c00, 00:06:4f:22:bf:6d, XID
>>> 04000000 IRQ 11
>>> [ 22.864688] usb 1-2: new low speed USB device using uhci_hcd and
>>> address 2
>>> [ 22.952134] Attempting manual resume
>>> [ 22.952141] swsusp: Resume From Partition 8:5
>>> [ 22.952144] PM: Checking swsusp image.
>>> [ 22.952378] PM: Resume from disk failed.
>>> [ 23.010418] kjournald starting. Commit interval 5 seconds
>>> [ 23.010442] EXT3-fs: mounted filesystem with ordered data mode.
>>> [ 23.038378] usb 1-2: configuration #1 chosen from 1 choice
>>> [ 29.664951] iTCO_vendor_support: vendor-support=0
>>> [ 29.666781] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>>> [ 29.666923] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460)
>>> [ 29.667000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>>> [ 29.682804] intel_rng: Firmware space is locked read-only.
>>> <4>intel_rng: If you can't or
>>> [ 29.682809] don't want to <4>intel_rng: disable this in firmware
>>> setup, and <4>intel_rng: if
>>> [ 29.682813] you are certain that your <4>intel_rng: system has a
>>> functional
>>> [ 29.682815] RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>>> [ 29.756843] Linux agpgart interface v0.102 (c) Dave Jones
>>> [ 29.760834] agpgart: Detected an Intel i850 Chipset.
>>> [ 29.765079] agpgart: AGP aperture is 64M @ 0xf0000000
>>> [ 29.937288] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>> [ 30.045342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>>> [ 31.006564] input: PC Speaker as /class/input/input2
>>> [ 31.383385] Linux video capture interface: v2.00
>>> [ 31.476180] cx18: Start initialization, version 0.1.0
>>> [ 31.476281] cx18-0: Initializing card #0
>>> [ 31.476287] cx18-0: Autodetected Hauppauge card
>>> [ 31.476319] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKH] -> GSI
>>> 9 (level, low) -> IRQ 9
>>> [ 31.476337] cx18-0: Unreasonably low latency timer, setting to 64
>>> (was 32)
>>> [ 31.476602] cx18-0: cx23418 revision 01010000 (B)
>>> [ 31.605258] tveeprom 0-0050: Huh, no eeprom present (err=-121)?
>>> [ 31.605267] tveeprom 0-0050: Encountered bad packet header [07].
>>> Corrupt or not a Hauppauge eeprom.
>>> [ 31.605272] cx18-0: Invalid EEPROM
>>> [ 31.811053] input: PS/2 Generic Mouse as /class/input/input3
>>> [ 31.813909] parport_pc 00:09: reported by Plug and Play ACPI
>>> [ 31.813970] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
>>> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>>> [ 31.941505] tuner 1-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
>>> [ 31.941547] tda9887 1-0043: creating new instancels
>>> /lib/firmware/2.6.22-14-generic/ | grep cx23418
>>> v4l-cx23418-apu.fw
>>> v4l-cx23418-cpu.fw
>>> v4l-cx23418-dig.fw
>>>
>>> [ 31.941551] tda9887 1-0043: tda988[5/6/7] found
>>> [ 32.009093] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
>>> [ 32.009161] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
>>> [ 32.022452] lirc_dev: IR Remote Control driver registered, at major 61
>>> [ 32.033051]
>>> [ 32.033054] lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $
>>> [ 32.033059] lirc_atiusb: Paul Miller <[EMAIL PROTECTED]>
>>> [ 32.037317] lirc_dev: lirc_register_plugin: sample_rate: 0
>>> [ 32.058023] lirc_atiusb[2]: X10 WTI RF receiver on usb1:2
>>> [ 32.067209] usbcore: registered new interface driver lirc_atiusb
>>> [ 32.138843] nvidia: module license 'NVIDIA' taints kernel.
>>> [ 32.245940] cx18-0: Disabled encoder IDX device
>>> [ 32.246076] cx18-0: Registered device video0 for encoder MPEG (2 MB)
>>> [ 32.246081] cx18_dvb_register()
>>> [ 32.246085] DVB: registering new adapter (cx18)
>>> [ 32.536068] s5h1409_readreg: readreg error (ret == -121)
>>> [ 32.536155] cx18: frontend initialization failed
>>> [ 32.536480] cx18-0: DVB failed to register
>>> [ 32.536572] cx18-0: Registered device video32 for encoder YUV (2 MB)
>>> [ 32.536635] cx18-0: Registered device vbi0 for encoder VBI (1 MB)
>>> [ 32.536707] cx18-0: Registered device video24 for encoder PCM audio
>>> (1 MB)
>>> [ 32.536768] cx18-0: Registered device radio0 for encoder radio
>>> [ 32.537246] cx18-0: Error -12 registering devices
>>> [ 32.537719] tda9887 1-0043: destroying instance
>>> [ 32.539445] cx18-0: Error -12 on initialization
>>> [ 32.539458] cx18: probe of 0000:02:0b.0 failed with error -12
>>>
>
> Ack I missed this. -12 is -ENOMEM. You may need to add a line similar
> to the following to /etc/sysctl.conf:
>
> vm.min_free_kbytes = 16384
>
> To get rid of the ENOMEM problem.
>
> That still won't fix the I2C problem that gives you the EEPROM messages
> (-121 is -EREMOTEIO, refering to the remote I2C on the HVR-1600).
>
> -Andy
>
>
>>> [ 32.539494] cx18: End initialization
>>> [ 32.540105] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI
>>> 11 (level, low) -> IRQ 11
>>> [ 32.540454] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-7185
>>> Mon Apr 2 18:29:54 PDT 2007
>>> [ 32.907378] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>>> [ 32.907387] PCI: setting IRQ 10 as level-triggered
>>> [ 32.907392] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKB] -> GSI
>>> 10 (level, low) -> IRQ 10
>>> [ 32.907431] Vortex: init.... <6>done.
>>> [ 33.659993] gameport: AU88x0 Gameport is pci0000:02:0c.0/gameport0,
>>> speed 1084kHz
>>> [ 34.359572] lp0: using parport0 (interrupt-driven).
>>> [ 34.620901] Adding 1124508k swap on /dev/sda5. Priority:-1 extents:1
>>> across:1124508k
>>> [ 35.026225] EXT3 FS on sda1, internal journal
>>> [ 38.477886] input: Power Button (FF) as /class/input/input4
>>> [ 38.484772] ACPI: Power Button (FF) [PWRF]
>>> [ 38.546728] input: Sleep Button (CM) as /class/input/input5
>>> [ 38.553464] ACPI: Sleep Button (CM) [SBTN]
>>> [ 38.604662] No dock devices found.
>>> [ 43.373239] r8169: eth0: link up
>>> [ 43.891724] NET: Registered protocol family 10
>>> [ 43.892038] lo: Disabled Privacy Extensions
>>> [ 58.344722] NET: Registered protocol family 17
>>> [ 72.156210] eth0: no IPv6 routers present
>>>
>>>
>>> ls /lib/firmware/2.6.22-14-generic/ | grep cx23418
>>> v4l-cx23418-apu.fw
>>> v4l-cx23418-cpu.fw
>>> v4l-cx23418-dig.fw
>>>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
