I am running ivtv 0.10.6 with 2.6.18-53 on centos 5 After some time the audio just stops.
Restarting mplayer does not restart the audio. Video continues to run just fine. I run this command v4l2-ctl -c audio_layer_ii_bitrate=13 before I start mplayer. I start mplayer with: /usr/local/bin/mplayer -alang en -ao alsa:noblock -noconsolecontrols -really-quiet -quiet -fs -monitoraspect 16:9 /dev/video Rebooting does restart the audio. Any Idea why audio stops playing??? Jerry ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.6 (tagged release) loading ivtv: Linux version: 2.6.18-53.1.14.el5 SMP mod_unload gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) sd 0:0:0:0: Attached scsi generic sg0 type 0 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) nvidia: module license 'NVIDIA' taints kernel. ivtv0: Encoder revision: 0x02060039 tveeprom 0-0050: The eeprom says no radio is present, but the tuner type tveeprom 0-0050: indicates otherwise. I will assume that radio is present. tveeprom 0-0050: Hauppauge model 25012, rev B168, serial# 8319894 tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is CX25843 (idx 37) tveeprom 0-0050: decoder processor is CX25843 (idx 30) tveeprom 0-0050: has radio, has no IR remote ivtv0: Autodetected Hauppauge WinTV PVR-150 tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 PCI: Setting latency timer of device 0000:00:05.0 to 64 ivtv: ==================== END INIT IVTV ==================== rtc: lost some interrupts at 1024Hz. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
