Andy Walls wrote:
> Daryl,
First, I want to apologize for dumping all of this on you. Its such a
lot that I feel guilty.
>
> Sorry to reply to this part of the thread instead of your latest message
> - email logistics problems. Anyway...
>
> OK, you have obvious PCI bus communications problems. The CX23418 could
> be the cause or something else in your system could be the cause.
> Recent experience leads me to believe it's likely the CX23418.
>
> The good news is you are using the '1.0.1' version of the cx18 driver
> that does PCI retries to get reliable communications to the CX23418.
> The bad news is, it doesn't appear to work for you.
>
> So here's some things to do:
>
> 1. Don't use the 'mmio_ndelay' module parameter. With the new
> 'retry_mmio' module parameter enabled (which is the default),
> 'mmio_ndelay' has a statistically insignificant effect, if any at all.
>
>
>
> 2. You've got a memory shortage of some sort (error -12 is -ENOMEM).
> This may be related to vmalloc address space or actual memory pages to
> allocate. To check Vmalloc space
>
> $ cat /proc/meminfo | grep -i vmalloc
> VmallocTotal: 34359738367 kB
> VmallocUsed: 76476 kB
> VmallocChunk: 34359661291 kB
Here is my result...
[EMAIL PROTECTED]:~$ cat /proc/meminfo | grep -i vmalloc
VmallocTotal: 34359738367 kB
VmallocUsed: 6592 kB
VmallocChunk: 34359731751 kB
If I am understanding this correctly, "total used" is 6.4375 MB (way to
low) and "chunk" is 33554425.53809 MB? Is that possible?
>
> if Total-Used is < 64 MB or Chunk is < 64 MB, you'll need to add a
> 'vmalloc=nnnM' option to your kernel command line. If adding the
> vmalloc kernel command line option, use a value 128 MB greater than your
> current total.
Are you saying to add 128 MB to 34359738367 kB? That would be
33554553.53809 MB. I am sure I am wrong about this, aren't I?
I beleive the "kernel command line" is found in boot/grub/menu.lst and I
have listed it...
title Ubuntu 8.04.1, kernel 2.6.24-21-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.24-21-generic
root=UUID=ca07ba3c-44d2-47a0-81ee-e709258ac5aa ro quiet splash
initrd /boot/initrd.img-2.6.24-21-generic
quiet
If I am correct so far, please edit it the way you think it should be,
as I am feeling a little unsure of the process.
>
> If your vmalloc space is OK, as a workaround you can use module
> parameters to reduce the memory required by the driver.
>
> $ su - root
> # modprobe cx18 enc_mpg_buffers=1 enc_ts_buffers=0 \
> enc_yuv_buffers=0 enc_pcm_buffers=0
>
>
>
> 3. The version '1.0.1' cx18 driver logs statistics about PCI mmio
> retires. If you do this
>
> $ su - root
> # modprobe cx18 debug=3
> # modprobe -r cx18
su - root doesn't work. So I did the following...
[EMAIL PROTECTED]:~$ sudo modprobe cx18 debug=3
[EMAIL PROTECTED]:~$ sudo modprobe -r cx18
[EMAIL PROTECTED]:~$
Both gave no result.
>
> Then even if the driver fails to initialize the card, it should dump
> statistics to dmesg when it is removed. They look something like this:
>
> cx18-0 info: retried_write[0] = 3715891
> cx18-0 info: retried_write[1] = 51
> cx18-0 info: retried_write[2] = 11
> cx18-0 info: retried_write[3] = 9
> cx18-0 info: retried_write[4] = 3
> cx18-0 info: retried_write[5] = 9
> cx18-0 info: retried_write[6] = 14
> cx18-0 info: retried_write[7] = 12
> cx18-0 info: retried_write[8] = 16
> cx18-0 info: retried_write[9] = 15
> cx18-0 info: retried_write[10] = 593956
> cx18-0 info: retried_read[0] = 10376734
> cx18-0 info: retried_read[1] = 0
> cx18-0 info: retried_read[2] = 0
> cx18-0 info: retried_read[3] = 0
> cx18-0 info: retried_read[4] = 0
> cx18-0 info: retried_read[5] = 0
> cx18-0 info: retried_read[6] = 0
> cx18-0 info: retried_read[7] = 0
> cx18-0 info: retried_read[8] = 0
> cx18-0 info: retried_read[9] = 0
> cx18-0 info: retried_read[10] = 456
>
> 'retried_write[10]' and 'retried_read[10]' are the count of accesses
> that absolutely failed.
>
> 'retried_write[0]' and 'retried_read[0]' are the count of accesses that
> succeeded on the first try.
>
> Indices 1-9 log the number of access that succeeded on 1-9 retries.
>
> Could you provide the statistics from you driver?
>
>
> 4. Could you provide the output of
>
> # lspci -nnvv
[EMAIL PROTECTED]:~$ sudo lspci -nnvv
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller
[10de:03ea] (rev a1)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE-
CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge
[10de:03e0] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c000 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at c800 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller
[10de:03f5] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:0c11]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller
[10de:03f1] (rev a3) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f3006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller
[10de:03f2] (rev a3) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f3007000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge
[10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e8000000-efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [b8] Subsystem: Giga-byte Technology Unknown device
[1458:026f]
Capabilities: [8c] HyperTransport: MSI Mapping
00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition
Audio [10de:03f0] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec]
(rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device [f458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef]
(rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 510
Region 0: Memory at f3004000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Queue=0/3 Enable+
Address: 00000000fee0300c Data: 4181
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller
[10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at f3005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge
[10de:03e8] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [40] Subsystem: nVidia Corporation Unknown device
[10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x8
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
01:06.0 Multimedia video controller [0400]: Conexant CX23418 Single-Chip
MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder
[14f1:5b7a]
Subsystem: Hauppauge computer works Inc. Unknown device [0070:7444]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 50000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:07.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI
[1814:0301]
Subsystem: Linksys WMP54G ver 4.1 [1737:0055]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 VGA compatible controller [0300]: nVidia Corporation G72
[GeForce 7300 SE] [10de:01d3] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Unknown device [3842:c428]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f1000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f2000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <256ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x8
[EMAIL PROTECTED]:~$
>
> run as root on your system? I'm specifically looking for the setting of
> the latency timer of the bridges the CX23418 is behind, also for the PCI
> Status flags, and for the specific Southbridge chipset you have.
>
>
> 5. Could you provide the full lines of the cx18-driver Oops that
> happened in you last log (don't grep on cx18 please)?
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000
- 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000
- 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000
- 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 257229
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
root=UUID=ca07ba3c-44d2-47a0-81ee-e709258ac5aa ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] hpet clockevent registered
[ 0.000000] TSC calibrated against HPET
[ 19.524421] Marking TSC unstable due to TSCs unsynchronized
[ 19.524423] time.c: Detected 2210.051 MHz processor.
[ 19.526745] Console: colour VGA+ 80x25
[ 19.526748] console [tty0] enabled
[ 19.526763] Checking aperture...
[ 19.526766] CPU 0: aperture @ fbac000000 size 32 MB
[ 19.526767] Aperture too small (32 MB)
[ 19.532657] No AGP bridge found
[ 19.543538] Memory: 1021108k/1048512k available (2490k kernel code,
27016k reserved, 1318k data, 320k init)
[ 19.543575] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4,
CPUs=4, Nodes=1
[ 19.622336] Calibrating delay using timer specific routine.. 4424.34
BogoMIPS (lpj=8848685)
[ 19.622368] Security Framework initialized
[ 19.622375] SELinux: Disabled at boot.
[ 19.622387] AppArmor: AppArmor initialized
[ 19.622391] Failure registering capabilities with primary security
module.
[ 19.622474] Dentry cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 19.623196] Inode-cache hash table entries: 65536 (order: 7, 524288
bytes)
[ 19.623543] Mount-cache hash table entries: 256
[ 19.623668] Initializing cgroup subsys ns
[ 19.623671] Initializing cgroup subsys cpuacct
[ 19.623683] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 19.623685] CPU: L2 Cache: 512K (64 bytes/line)
[ 19.623687] CPU 0/0 -> Node 0
[ 19.623689] CPU: Physical Processor ID: 0
[ 19.623691] CPU: Processor Core ID: 0
[ 19.623712] SMP alternatives: switching to UP code
[ 19.624272] Early unpacking initramfs... done
[ 19.901277] ACPI: Core revision 20070126
[ 19.901321] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 19.945071] Using local APIC timer interrupts.
[ 19.990289] APIC timer calibration result 12557106
[ 19.990291] Detected 12.557 MHz APIC timer.
[ 19.990378] SMP alternatives: switching to SMP code
[ 19.990847] Booting processor 1/2 APIC 0x1
[ 20.001450] Initializing CPU#1
[ 20.078774] Calibrating delay using timer specific routine.. 4420.13
BogoMIPS (lpj=8840260)
[ 20.078780] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 20.078781] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.078784] CPU 1/1 -> Node 0
[ 20.078785] CPU: Physical Processor ID: 0
[ 20.078786] CPU: Processor Core ID: 1
[ 20.078860] AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 20.078402] Brought up 2 CPUs
[ 20.078494] CPU0 attaching sched-domain:
[ 20.078496] domain 0: span 03
[ 20.078498] groups: 01 02
[ 20.078500] domain 1: span 03
[ 20.078502] groups: 03
[ 20.078503] CPU1 attaching sched-domain:
[ 20.078505] domain 0: span 03
[ 20.078506] groups: 02 01
[ 20.078508] domain 1: span 03
[ 20.078509] groups: 03
[ 20.078721] net_namespace: 120 bytes
[ 20.079094] Time: 22:49:01 Date: 10/12/08
[ 20.079127] NET: Registered protocol family 16
[ 20.079292] ACPI: bus type pci registered
[ 20.079353] PCI: Using configuration type 1
[ 20.080444] ACPI: EC: Look up EC in DSDT
[ 20.085656] ACPI: Interpreter enabled
[ 20.085658] ACPI: (supports S0 S1 S4 S5)
[ 20.085671] ACPI: Using IOAPIC for interrupt routing
[ 20.093308] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.093877] PCI: Transparent bridge - 0000:00:04.0
[ 20.093969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.094170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 20.121271] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 20.121408] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
[ 20.121542] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.121676] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.121810] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.121943] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.122077] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.122219] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.122353] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.122487] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.122622] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 20.122757] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 20.122891] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 20.123025] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.123160] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 20.123295] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 20.123428] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.123564] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 20.123698] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 20.123867] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 20.124029] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 20.124189] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 20.124352] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 20.124512] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 20.124670] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 20.124828] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 20.124987] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 20.125146] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0,
disabled.
[ 20.125305] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 20.125465] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 20.125624] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0,
disabled.
[ 20.125784] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 20.125943] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 20.126102] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 20.126263] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0,
disabled.
[ 20.126423] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0,
disabled.
[ 20.126583] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 20.126742] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0,
disabled.
[ 20.126853] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.126877] pnp: PnP ACPI init
[ 20.126885] ACPI: bus type pnp registered
[ 20.130870] pnp: PnP ACPI: found 15 devices
[ 20.130872] ACPI: ACPI bus type pnp unregistered
[ 20.131080] PCI: Using ACPI for IRQ routing
[ 20.131083] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[ 20.142226] NET: Registered protocol family 8
[ 20.142228] NET: Registered protocol family 20
[ 20.142298] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 20.142302] hpet0: 3 32-bit timers, 25000000 Hz
[ 20.143345] AppArmor: AppArmor Filesystem Enabled
[ 20.146183] Time: hpet clocksource has been installed.
[ 20.146194] Switched to high resolution mode on CPU 0
[ 20.146834] Switched to high resolution mode on CPU 1
[ 20.154179] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 20.154182] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 20.154185] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 20.154187] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 20.154190] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 20.154192] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 20.154196] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been
reserved
[ 20.154198] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been
reserved
[ 20.154201] system 00:01: iomem range 0x0-0x0 could not be reserved
[ 20.154207] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 20.154209] system 00:02: ioport range 0x800-0x87f has been reserved
[ 20.154212] system 00:02: ioport range 0x295-0x314 has been reserved
[ 20.154214] system 00:02: ioport range 0x290-0x294 has been reserved
[ 20.154225] system 00:0d: iomem range 0xe0000000-0xe7ffffff could not
be reserved
[ 20.154230] system 00:0e: iomem range 0xce200-0xcffff has been reserved
[ 20.154233] system 00:0e: iomem range 0xf0000-0xf7fff could not be
reserved
[ 20.154235] system 00:0e: iomem range 0xf8000-0xfbfff could not be
reserved
[ 20.154238] system 00:0e: iomem range 0xfc000-0xfffff could not be
reserved
[ 20.154241] system 00:0e: iomem range 0x3fff0000-0x3fffffff could not
be reserved
[ 20.154243] system 00:0e: iomem range 0xffff0000-0xffffffff has been
reserved
[ 20.154246] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 20.154249] system 00:0e: iomem range 0x100000-0x3ffeffff could not
be reserved
[ 20.154251] system 00:0e: iomem range 0x0-0x0 could not be reserved
[ 20.154254] system 00:0e: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 20.154257] system 00:0e: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 20.154602] PCI: Bridge: 0000:00:04.0
[ 20.154603] IO window: disabled.
[ 20.154606] MEM window: e8000000-efffffff
[ 20.154608] PREFETCH window: disabled.
[ 20.154613] PCI: Bridge: 0000:00:09.0
[ 20.154614] IO window: disabled.
[ 20.154616] MEM window: f0000000-f2ffffff
[ 20.154618] PREFETCH window: d0000000-dfffffff
[ 20.154627] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 20.154637] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 20.154646] NET: Registered protocol family 2
[ 20.190205] IP route cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 20.190634] TCP established hash table entries: 131072 (order: 9,
2097152 bytes)
[ 20.192120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 20.192811] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.192814] TCP reno registered
[ 20.202272] checking if image is initramfs... it is
[ 20.747699] Freeing initrd memory: 7553k freed
[ 20.753596] audit: initializing netlink socket (disabled)
[ 20.753608] audit(1223851741.188:1): initialized
[ 20.755312] VFS: Disk quotas dquot_6.5.1
[ 20.755375] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 20.755496] io scheduler noop registered
[ 20.755497] io scheduler anticipatory registered
[ 20.755499] io scheduler deadline registered
[ 20.755584] io scheduler cfq registered (default)
[ 20.755612] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 20.756235] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 20.756253] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 20.756276] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 20.756288] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 20.756300] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 20.756319] Boot video device is 0000:02:00.0
[ 20.756457] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 20.756476] assign_interrupt_mode Found MSI capability
[ 20.756493] Allocate Port Service[0000:00:09.0:pcie00]
[ 20.779813] Real Time Clock Driver v1.12ac
[ 20.779985] hpet_resources: 0xfeff0000 is busy
[ 20.780019] Linux agpgart interface v0.102
[ 20.780021] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 20.780138] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.780256] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 20.780689] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.780928] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 20.781554] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 20.781611] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 20.782014] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 20.782376] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.782379] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.797735] mice: PS/2 mouse device common for all mice
[ 20.797769] cpuidle: using governor ladder
[ 20.797771] cpuidle: using governor menu
[ 20.797917] NET: Registered protocol family 1
[ 20.798007] registered taskstats version 1
[ 20.798116] Magic number: 12:49:856
[ 20.798193] hash matches device ptyv8
[ 20.798202] hash matches device ptysb
[ 20.798248] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable
to open rtc device (rtc0)
[ 20.798251] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.798253] EDD information not available.
[ 20.798260] Freeing unused kernel memory: 320k freed
[ 20.818724] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 21.996858] fuse init (API version 7.9)
[ 22.020980] ACPI Exception (processor_core-0822): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 22.020992] ACPI Exception (processor_core-0822): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 22.341794] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.61.
[ 22.342124] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 22.342134] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI
23 (level, low) -> IRQ 23
[ 22.342139] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 22.353240] usbcore: registered new interface driver usbfs
[ 22.353260] usbcore: registered new interface driver hub
[ 22.357759] SCSI subsystem initialized
[ 22.368451] usbcore: registered new device driver usb
[ 22.389109] libata version 3.00 loaded.
[ 22.389177] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
(OHCI) Driver
[ 22.861533] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x20 @ 1,
addr 00:1d:7d:2b:a1:df
[ 22.861538] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim
msi desc-v3
[ 22.861407] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 22.861416] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI
22 (level, low) -> IRQ 22
[ 22.861613] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 22.861619] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 22.861840] ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 1
[ 22.861868] ehci_hcd 0000:00:02.1: debug port 1
[ 22.861871] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 22.861880] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf3007000
[ 22.876057] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 22.876171] usb usb1: configuration #1 chosen from 1 choice
[ 22.876193] hub 1-0:1.0: USB hub found
[ 22.876203] hub 1-0:1.0: 8 ports detected
[ 22.976939] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 22.976948] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI
21 (level, low) -> IRQ 21
[ 22.977144] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 22.977151] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 22.977209] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 2
[ 22.977231] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf3006000
[ 23.034559] usb usb2: configuration #1 chosen from 1 choice
[ 23.034579] hub 2-0:1.0: USB hub found
[ 23.034586] hub 2-0:1.0: 8 ports detected
[ 23.136171] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 23.136513] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 23.136520] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI
20 (level, low) -> IRQ 20
[ 23.136535] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 23.136541] ACPI: PCI interrupt for device 0000:00:08.0 disabled
[ 23.137114] sata_nv 0000:00:08.0: version 3.5
[ 23.137129] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI
20 (level, low) -> IRQ 20
[ 23.137378] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 23.140354] scsi0 : sata_nv
[ 23.141578] scsi1 : sata_nv
[ 23.141728] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000
irq 20
[ 23.141730] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008
irq 20
[ 23.607493] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 23.637624] ata1.00: ATA-7: WDC WD2500YS-01SHB1, 20.06C06, max UDMA/133
[ 23.637628] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 23.644634] ata1.00: configured for UDMA/133
[ 24.111099] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.291048] ata2.00: ATAPI: PHILIPS SPD2513P, MP03, max UDMA/100
[ 24.478903] ata2.00: configured for UDMA/100
[ 24.479544] scsi 0:0:0:0: Direct-Access ATA WDC WD2500YS-01S
20.0 PQ: 0 ANSI: 5
[ 24.480677] scsi 1:0:0:0: CD-ROM PHILIPS SPD2513P
MP03 PQ: 0 ANSI: 5
[ 24.480380] pata_amd 0000:00:06.0: version 0.3.10
[ 24.480423] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 24.480494] scsi2 : pata_amd
[ 24.480653] scsi3 : pata_amd
[ 24.481178] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 24.481181] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 24.488476] Driver 'sd' needs updating - please use bus_type methods
[ 24.488559] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors
(251000 MB)
[ 24.488569] sd 0:0:0:0: [sda] Write Protect is off
[ 24.488572] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.488584] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.488641] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors
(251000 MB)
[ 24.488649] sd 0:0:0:0: [sda] Write Protect is off
[ 24.488651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.488663] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.488666] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 24.494379] sda1 sda2 < sda5 >
[ 24.519892] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.523617] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.523634] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 24.536043] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 24.536048] Uniform CD-ROM driver Revision: 3.20
[ 24.536096] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 24.672000] ata3.00: HPA unlocked: 625140335 -> 625142448, native
625142448
[ 24.672006] ata3.00: ATA-8: WDC WD3200AAJB-22WGA0, 00.02C01, max UDMA/100
[ 24.672009] ata3.00: 625142448 sectors, multi 16: LBA48
[ 24.672020] ata3.00: limited to UDMA/33 due to 40-wire cable
[ 24.688486] ata3.00: configured for UDMA/33
[ 24.687988] ata4: port disabled. ignoring.
[ 24.688097] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJB-2
00.0 PQ: 0 ANSI: 5
[ 24.688174] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors
(320073 MB)
[ 24.688184] sd 2:0:0:0: [sdb] Write Protect is off
[ 24.688186] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 24.688199] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.688237] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors
(320073 MB)
[ 24.688245] sd 2:0:0:0: [sdb] Write Protect is off
[ 24.688247] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 24.688261] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 24.688265] sdb: sdb1 < sdb5 > sdb2 sdb3
[ 24.695293] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 24.695332] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 24.941269] Attempting manual resume
[ 24.941272] swsusp: Resume From Partition 8:5
[ 24.941274] PM: Checking swsusp image.
[ 24.941463] PM: Resume from disk failed.
[ 24.978782] kjournald starting. Commit interval 5 seconds
[ 24.979329] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.908419] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 32.948361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.956455] logips2pp: Detected unknown logitech mouse model 127
[ 32.990746] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.143609] input: Power Button (FF) as /devices/virtual/input/input3
[ 33.165180] ACPI: Power Button (FF) [PWRF]
[ 33.165281] input: Power Button (CM) as /devices/virtual/input/input4
[ 33.204904] ACPI: Power Button (CM) [PWRB]
[ 33.205527] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 33.205543] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800
[ 33.417109] input: ImExPS/2 Logitech Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 33.433881] Linux video capture interface: v2.00
[ 33.491016] parport_pc 00:0a: reported by Plug and Play ACPI
[ 33.491063] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 33.617718] cx18: Start initialization, version 1.0.1
[ 33.617784] cx18-0: Initializing card #0
[ 33.617787] cx18-0: Autodetected Hauppauge card
[ 33.618101] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 33.618109] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI
16 (level, low) -> IRQ 16
[ 33.618118] cx18-0: Unreasonably low latency timer, setting to 64
(was 32)
[ 33.619391] cx18-0: cx23418 revision 01010000 (B)
[ 33.801941] tveeprom 2-0050: Huh, no eeprom present (err=-121)?
[ 33.801945] tveeprom 2-0050: Encountered bad packet header [c0].
Corrupt or not a Hauppauge eeprom.
[ 33.801948] cx18-0: Invalid EEPROM
[ 33.801950] cx18-0: VBI is not yet supported
[ 33.987866] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[ 33.991783] cx18-0: Disabled encoder IDX device
[ 33.991817] cx18-0: Registered device video0 for encoder MPEG (2 MB)
[ 33.991820] DVB: registering new adapter (cx18)
[ 34.035216] s5h1409_readreg: readreg error (ret == -121)
[ 34.035242] cx18-0: frontend initialization failed
[ 34.035428] cx18-0: DVB failed to register
[ 34.035464] cx18-0: Registered device video32 for encoder YUV (2 MB)
[ 34.035481] cx18-0: Registered device video24 for encoder PCM audio
(1 MB)
[ 34.035498] cx18-0: Registered device radio0 for encoder radio
[ 34.035660] cx18-0: Error -12 registering devices
[ 34.037110] cx18-0: Error -12 on initialization
[ 34.037128] cx18: probe of 0000:01:06.0 failed with error -12
[ 34.037190] cx18: End initialization
[ 34.038092] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 34.038102] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI
17 (level, low) -> IRQ 17
[ 34.044923] phy0: Selected rate control algorithm 'simple'
[ 34.103360] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 34.103365] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI
23 (level, low) -> IRQ 23
[ 34.103546] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 36.071064] lp0: using parport0 (interrupt-driven).
[ 36.149285] Adding 3012148k swap on /dev/sda5. Priority:-1 extents:1
across:3012148k
[ 36.705138] EXT3 FS on sda1, internal journal
[ 36.857284] device-mapper: uevent: version 1.0.3
[ 36.857327] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02)
initialised: [EMAIL PROTECTED]
[ 37.996244] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 38.355799] No dock devices found.
[ 38.572803] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
Processor 4200+ processors (2 cpu cores) (version 2.20.00)
[ 38.572386] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0xc
[ 38.572390] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xe
[ 38.572392] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x10
[ 38.572394] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 39.393291] ppdev: user-space parallel port driver
[ 39.516162] audit(1223851760.525:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=5239 profile="/usr/sbin/cupsd" namespace="default"
[ 40.158227] eth0: no link during initialization.
[ 40.242351] Bluetooth: Core ver 2.11
[ 40.242788] NET: Registered protocol family 31
[ 40.242792] Bluetooth: HCI device and connection manager initialized
[ 40.242796] Bluetooth: HCI socket layer initialized
[ 40.259725] Bluetooth: L2CAP ver 2.9
[ 40.259731] Bluetooth: L2CAP socket layer initialized
[ 40.316277] Bluetooth: RFCOMM socket layer initialized
[ 40.316292] Bluetooth: RFCOMM TTY layer initialized
[ 40.316294] Bluetooth: RFCOMM ver 1.8
[ 40.910232] Clocksource tsc unstable (delta = -90932944 ns)
[ 48.388253] NET: Registered protocol family 17
[ 48.612397] NET: Registered protocol family 10
[ 48.612633] lo: Disabled Privacy Extensions
[ 48.613032] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.613425] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.796690] wlan0: Initial auth_alg=0
[ 48.796699] wlan0: authenticate with AP 00:17:3f:f1:1a:2c
[ 48.797384] wlan0: RX authentication from 00:17:3f:f1:1a:2c (alg=0
transaction=2 status=0)
[ 48.797388] wlan0: authenticated
[ 48.797390] wlan0: associate with AP 00:17:3f:f1:1a:2c
[ 48.798655] wlan0: RX AssocResp from 00:17:3f:f1:1a:2c (capab=0x431
status=0 aid=1)
[ 48.798659] wlan0: associated
[ 48.798662] wlan0: switched to short barker preamble
(BSSID=00:17:3f:f1:1a:2c)
[ 48.799557] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 56.835399] wlan0: no IPv6 routers present
[EMAIL PROTECTED]:~$
>
>
> 6. Don't load and unload the cx18 driver too many times in a row without
> being prepared to deal with a kernel oops or hang. There's a memory
> leak in the driver that only happens when a card fails to initialize.
> (Sorry, I know I need to fix it.)
>
>
> 7. Can you test the same card under Windows in the same machine
> (ideally) or a different machine?
I can give you results on a WindowsXP setup on a differant hard drive if
I know what you want me to supply.
>
>
> Regards,
> Andy
Thanks for your dedication.
Daryl
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
