On Fri, 2008-10-17 at 13:13 -0400, daryl wrote: > Andy. > My card is now properly detected!! > Does this dmesg output look better to you? > > [EMAIL PROTECTED]:~$ dmesg | grep cx18 > [ 40.984424] cx18: Start initialization, version 1.0.1 > [ 41.007731] cx18-0: Initializing card #0 > [ 41.007735] cx18-0: Autodetected Hauppauge card > [ 41.008058] cx18-0: Unreasonably low latency timer, setting to 64 > (was 32) > [ 41.009308] cx18-0: cx23418 revision 01010000 (B) > [ 41.229379] cx18-0: Autodetected Hauppauge HVR-1600 > [ 41.229380] cx18-0: VBI is not yet supported > [ 41.310921] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) > [ 41.310943] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) > [ 41.357354] cx18-0: Disabled encoder IDX device > [ 41.357400] cx18-0: Registered device video0 for encoder MPEG (2 MB) > [ 41.357403] DVB: registering new adapter (cx18) > [ 41.426775] cx18-0: DVB Frontend registered > [ 41.426805] cx18-0: Registered device video32 for encoder YUV (2 MB) > [ 41.426858] cx18-0: Registered device video24 for encoder PCM audio > (1 MB) > [ 41.426861] cx18-0: Initialized card #0: Hauppauge HVR-1600 > [ 41.481627] cx18: End initialization > [ 46.008139] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 > (141200 bytes) > [ 46.513344] cx18-0: loaded v4l-cx23418-cpu.fw firmware (174716 bytes) > [ 46.518491] cx18-0: FW version: 0.0.71.0 (Release 2006/12/29) > [ 47.401321] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
Yup. Everything looks copacetic. Do you mind sharing on what corrective action you took? BTW, when testing, please don't be surprised by the following annoyances: 1. The first analog capture after a modprobe will have messed up audio/video timestamps or no audio at all, so playback will be like a "fast forward" or have no sound at all. Every subsequent analog capture will be fine. 2. Unbuffered playback will not be smooth. If you use mplayer, make sure you use the -cache 16384 command line option to get buffered playback. 3. During simultaneous digital and audio capture one of the streams may halt (with MythTV at least). Reason unknown as of yet. Regards, Andy _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
