Andy. My card is now properly detected!! Does this dmesg output look better to you?
[EMAIL PROTECTED]:~$ dmesg | grep cx18 [ 40.984424] cx18: Start initialization, version 1.0.1 [ 41.007731] cx18-0: Initializing card #0 [ 41.007735] cx18-0: Autodetected Hauppauge card [ 41.008058] cx18-0: Unreasonably low latency timer, setting to 64 (was 32) [ 41.009308] cx18-0: cx23418 revision 01010000 (B) [ 41.229379] cx18-0: Autodetected Hauppauge HVR-1600 [ 41.229380] cx18-0: VBI is not yet supported [ 41.310921] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) [ 41.310943] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0) [ 41.357354] cx18-0: Disabled encoder IDX device [ 41.357400] cx18-0: Registered device video0 for encoder MPEG (2 MB) [ 41.357403] DVB: registering new adapter (cx18) [ 41.426775] cx18-0: DVB Frontend registered [ 41.426805] cx18-0: Registered device video32 for encoder YUV (2 MB) [ 41.426858] cx18-0: Registered device video24 for encoder PCM audio (1 MB) [ 41.426861] cx18-0: Initialized card #0: Hauppauge HVR-1600 [ 41.481627] cx18: End initialization [ 46.008139] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) [ 46.513344] cx18-0: loaded v4l-cx23418-cpu.fw firmware (174716 bytes) [ 46.518491] cx18-0: FW version: 0.0.71.0 (Release 2006/12/29) [ 47.401321] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
