Intrepid Ibex should with the HVR-1600 and MythTV out of the box. Can you
post the dmesg for the distribution kernel and modules.

--
Richard


On Tue, Nov 18, 2008 at 1:21 PM, Vidar Brekke <[EMAIL PROTECTED]> wrote:

> Just installed a fresh copy of Ubuntu Intrepid Ibex and I am trying to
> get it to work with my Hauppauge HVR-1600 capture card . This is my
> first Linux box and my primary motive is to play around with MythTV.
>
> I can't get it to work. I've followed the instructions here:
> http://www.ivtvdriver.org/index.php/Cx18
>
> When I issue "dmesg | grep cx18", this is what I get:
>
> [ 29.567357] cx18: Start initialization, version 1.0.2
> [ 29.567432] cx18-0: Initializing card #0
> [ 29.567437] cx18-0: Autodetected Hauppauge card
> [ 29.568518] cx18 0000:04:06.0: PCI INT A -> Link[APC3] -> GSI 18
> (level, low) -> IRQ 18
> [ 29.568531] cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
> [ 29.574859] cx18-0: cx23418 revision 01010000 (B)
> [ 30.082224] cx18-0: Invalid EEPROM
> [ 30.082228] cx18-0: VBI is not yet supported
> [ 30.719518] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
> [ 30.725305] cx18-0: Disabled encoder IDX device
> [ 30.725457] cx18-0: Registered device video0 for encoder MPEG (2 MB)
> [ 30.725462] DVB: registering new adapter (cx18)
> [ 30.870672] cx18-0: frontend initialization failed
> [ 30.871033] cx18-0: DVB failed to register
> [ 30.871128] cx18-0: Registered device video32 for encoder YUV (2 MB)
> [ 30.871196] cx18-0: Registered device video24 for encoder PCM audio (1 MB)
> [ 30.871263] cx18-0: Registered device radio0 for encoder radio
> [ 30.871691] cx18-0: Error -1 registering devices
> [ 30.872479] cx18-0: Error -1 on initialization
> [ 30.872497] cx18: probe of 0000:04:
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to