Hello all. I was hoping someone would have insight into what is going on with my setup. I am trying to get my Haupppauge PVR-350 to work correctly on my Ubuntu (kernel 2.6.15), PowerPC machine. Let me know your thoughts on how to get my setup going:
[EMAIL PROTECTED]:/home/smiller# dmesg | tac | sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p; /= START INIT IVTV =/q' | tac [ 43.291067] ivtv: ==================== START INIT IVTV ==================== [ 43.291078] ivtv: version 0.4.10 (tagged release) loading [ 43.291081] ivtv: Linux version: 2.6.15-51-powerpc gcc-4.0 [ 43.291084] ivtv: In case of problems please include the debug info between [ 43.291098] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 43.291101] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 43.291761] ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) [ 43.291857] PCI: Enabling device 0001:11:03.0 (0014 -> 0016) [ 43.291871] ivtv0: Unreasonably low latency timer, setting to 64 (was 16) [ 43.345219] tveeprom: ivtv version [ 43.345227] tveeprom: Hauppauge: model = 48132, rev = K268, serial# = 9007053 [ 43.345231] tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) [ 43.345236] tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) [ 43.345239] tveeprom: audio processor = MSP4448 (type = 1b) [ 43.345243] tveeprom: decoder processor = SAA7115 (type = 13) [ 43.345249] ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] [ 43.367842] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 [ 43.367854] ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] [ 43.533021] saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) [ 43.635430] ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] [ 43.683311] saa7127 3-0044: ivtv driver [ 43.685119] saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) [ 43.686667] ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] [ 43.737939] msp3400 3-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler [ 43.737990] msp3400 3-0040: msp34xxg daemon started [ 43.754435] ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] [ 43.776156] tda9887 3-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) [ 43.776163] ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] [ 44.693028] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 44.780438] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 45.003114] ivtv0: Encoder revision: 0x02060039 [ 45.011133] ivtv0: Decoder revision: 0x02020023 [ 45.011393] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) [ 45.011932] ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) [ 45.012359] ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) [ 45.012727] ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) [ 45.013424] ivtv0: Create encoder radio stream [ 45.013565] ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) [ 45.013788] ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) [ 45.014545] ivtv0: Create decoder VOUT stream [ 45.014688] ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total) [ 45.039051] ivtv0: unable to open firmware v4l-cx2341x-init.mpg (must be 155648 bytes) [ 45.039058] ivtv0: did you put the firmware in the hotplug firmware directory? [ 45.039063] ivtv0: failed to read mpeg decoder initialisation file v4l-cx2341x-init.mpg [ 45.047201] tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 [ 45.174660] ivtv0: Initialized WinTV PVR 350, card #0 [ 45.174690] ivtv: ==================== END INIT IVTV ==================== Now I know there are errors up there about my firmware. I have firmware in just about ever directory i can think of. Please let me know which directory they need to be in. Just for the record, I don't think Ubuntu Dapper (2.6.15) has a hotplug directory. If I do a locate I get this: [EMAIL PROTECTED]:/home/smiller# locate v4l-cx2341x-init.mpg /lib/firmware/2.6.15-51-powerpc/v4l-cx2341x-init.mpg.bin /lib/modules/2.6.15-51-powerpc/v4l-cx2341x-init.mpg Also: [EMAIL PROTECTED]:/home/smiller# lspci -v | grep Multimedia 0001:11:03.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Let me know what I need to do. Thank you for all your help in advance!! _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
