Daniel Flesner <[email protected]> writes: > Andy Walls <[email protected]> writes: > >> Daniel Flesner <[email protected]> wrote: >> >>> >>>i use my hvr-1600 to watch clear QAM on time warner cable in the >>>Raleigh, NC area. recently the local ABC station disappeared and their >>>website said to rescan as the station was moved on TWC. i've tried >>>several methods to try to re-find the station, but non have worked so >>>far: >>> >>>w_scan -o 7 -fa -A2 -c US -x > channels.scan >>>scandvb channels.scan > channels.conf >>> >>>and >>> >>>w_scan -fa -c US -A2 -M > channels.conf >>> >>>and >>> >>>scandvb -A 2 >>>/usr/share/dvb/atsc/us-Cable-Standard-center-frequencies-QAM256 > >>>channels.conf >>> >>>none finds the ABC station, but i still find the old FOX, NBC, and CBS >>>stations fine. >>> >>>i'm running it on fedora 15 with the regular 2.6.35.13-92.fc14.x86_64 >>>kernel driver. >>> >>>any suggestions? >>> >>>_______________________________________________ >>>ivtv-users mailing list >>>[email protected] >>>http://ivtvdriver.org/mailman/listinfo/ivtv-users >> >> You might get the freq and PID info by going here and entering your zip code: >> >> http://www.silicondust.com/support/channels/ > > interesting, ABC is missing on that page as well. maybe it's just gone i > guess. that list seems to match mine as far as i've checked. > > thanks for the pointer, >
i started investigating this again since ABC started showing up on the silicondust site. they show it as channels 99-1,2, and 3. after looking at the frequency charts it describes these as "mid-band", much lower than the 94 and 100 channels? so i did a scandvb and looked at those frequencies and i get a tuning error: >>> tune to: 93000000:QAM_256 WARNING: >>> tuning failed!!! >>> tune to: 93000000:QAM_256 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 99000000:QAM_256 WARNING: >>> tuning failed!!! >>> tune to: 99000000:QAM_256 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 105000000:QAM_256 WARNING: >>> tuning failed!!! >>> tune to: 105000000:QAM_256 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 111000000:QAM_256 WARNING: >>> tuning failed!!! >>> tune to: 111000000:QAM_256 (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 117000000:QAM_256 WARNING: >>> tuning failed!!! >>> tune to: 117000000:QAM_256 (tuning failed) WARNING: >>> tuning failed!!! is this a problem with the driver, the card, or scandvb? w_scan seems to give the same errors in that frequency range. my system is stock fedora 14 with kernel 2.6.35.14-95.fc14.x86_64 currently. thanks again for any help, >> >> -Andy >> >> _______________________________________________ >> ivtv-users mailing list >> [email protected] >> http://ivtvdriver.org/mailman/listinfo/ivtv-users >> > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users -- If you hear something's happening, and it hasn't happened, don't always believe what you hear. -Barack Obama _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
