Trying to set up a PVR system on a Epia M10000 using PVR-350 (model 988 it says on the box, a sticker on top of "993"). It appears to load properly until it is setting "Tuner 38". This gives "i2c client addr: 0x61 not found!"
An atempt to run scantv give: Dec 8 01:57:41 r2d2 kernel: saa7115: status: 0xc0 Dec 8 01:57:41 r2d2 kernel: saa7115: decoder disable output Dec 8 01:57:41 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:57:41 r2d2 kernel: saa7115: decoder enable output for each attempt. Even the remote refuses to work (with irw; irrecord gives some strange results with same keycode for different keys). I'm running 2.4.26-epia2_2, ivtv 0.3.1x and lirc 0.7.0. This is in Norther Europe (PAL). Dec 8 01:56:32 r2d2 kernel: ivtv: ==================== START INIT IVTV ==================== Dec 8 01:56:32 r2d2 kernel: ivtv: version 0.3.1 (x) loading Dec 8 01:56:32 r2d2 kernel: ivtv: Linux version: 2.4.26-epia2 Dec 8 01:56:32 r2d2 kernel: ivtv: In case of problems please include the debug info Dec 8 01:56:32 r2d2 kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Dec 8 01:56:32 r2d2 kernel: ivtv: mailing the ivtv-devel mailinglist. Dec 8 01:56:32 r2d2 kernel: ivtv: Autodetected WinTV PVR 350 card Dec 8 01:56:32 r2d2 kernel: ivtv: Found an iTVC15 based chip Dec 8 01:56:32 r2d2 kernel: ivtv: VIA PCI device: 0x3123 vendor: 0x1106 Dec 8 01:56:32 r2d2 kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Dec 8 01:56:32 r2d2 kernel: saa7115: detecting saa7115 client on address 0x42 Dec 8 01:56:32 r2d2 kernel: saa7115: writing init values Dec 8 01:56:32 r2d2 kernel: ivtv: i2c attach [client=saa7115[0],ok] Dec 8 01:56:32 r2d2 kernel: saa7115: status: (1E) 0x40, (1F) 0xc0 Dec 8 01:56:32 r2d2 kernel: msp34xx: ivtv version Dec 8 01:56:32 r2d2 kernel: msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode Dec 8 01:56:32 r2d2 kernel: msp34xx: $Id$ compiled on: Dec 8 2004 01:08:18 Dec 8 01:56:32 r2d2 kernel: ivtv: i2c attach [client=MSP3418W-B3,ok] Dec 8 01:56:32 r2d2 kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7597100 Dec 8 01:56:32 r2d2 kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) Dec 8 01:56:32 r2d2 kernel: tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) Dec 8 01:56:32 r2d2 kernel: tveeprom: audio_processor = CS5331 (type = 9) Dec 8 01:56:32 r2d2 kernel: ivtv: i2c attach [client=tveeprom[0],ok] Dec 8 01:56:32 r2d2 kernel: ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x000 00001 Dec 8 01:56:32 r2d2 kernel: ivtv: PAL tuner detected Dec 8 01:56:32 r2d2 kernel: ivtv: SECAM tuner detected Dec 8 01:56:32 r2d2 kernel: ivtv: Radio detected Dec 8 01:56:32 r2d2 kernel: saa7127: video encoder driver version V 0.3 loaded Dec 8 01:56:32 r2d2 kernel: saa7127: detecting saa7127 client on address 0x88 Dec 8 01:56:32 r2d2 kernel: saa7127: Selecting NTSC video Standard Dec 8 01:56:32 r2d2 kernel: saa7127: Selecting S-Video+Composite Dec 8 01:56:32 r2d2 kernel: saa7127: Turn WSS off Dec 8 01:56:32 r2d2 kernel: saa7127: Widescreen Mode 4:3 Full Format Dec 8 01:56:32 r2d2 kernel: saa7127: Selecting Normal Encoder Input Dec 8 01:56:32 r2d2 kernel: saa7127: Enable Video Output Dec 8 01:56:32 r2d2 kernel: ivtv: i2c attach [client=saa7127[0],ok] Dec 8 01:56:33 r2d2 kernel: ivtv: Encoder revision: 0x02040011 Dec 8 01:56:33 r2d2 kernel: ivtv: Decoder revision: 0x02020023 Dec 8 01:56:33 r2d2 kernel: ivtv: Configuring WinTV PVR 350 card with 10 streams Dec 8 01:56:33 r2d2 kernel: ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 Dec 8 01:56:33 r2d2 kernel: ivtv: Create DMA stream 1 Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 Dec 8 01:56:33 r2d2 kernel: ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 Dec 8 01:56:33 r2d2 kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 Dec 8 01:56:33 r2d2 kernel: ivtv: Create stream 4 Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 Dec 8 01:56:33 r2d2 kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16 Dec 8 01:56:33 r2d2 kernel: ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228 Dec 8 01:56:33 r2d2 kernel: ivtv: Create stream 7 Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232 Dec 8 01:56:33 r2d2 kernel: ivtv: Create DMA stream 8 using 16 65536 byte buffers 1048576 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48 Dec 8 01:56:33 r2d2 kernel: ivtv: Create DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total Dec 8 01:56:33 r2d2 kernel: ivtv: Setting Tuner 38 Dec 8 01:56:33 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:56:33 r2d2 kernel: saa7115: decoder set input (4) Dec 8 01:56:33 r2d2 kernel: saa7115: now setting Composite input Dec 8 01:56:33 r2d2 kernel: ivtv: Setting audio matrix to input 3, output 1 Dec 8 01:56:33 r2d2 kernel: ivtv: Switching standard to PAL. Dec 8 01:56:33 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:56:33 r2d2 kernel: ivtv: ivtv_enc_thread: pid = 1231, itv = 0xcecaefa0 Dec 8 01:56:33 r2d2 kernel: ivtv: ivtv_dec_thread: pid = 1232, itv = 0xcecaefa0 Dec 8 01:56:34 r2d2 kernel: saa7115: decoder set norm PAL Dec 8 01:56:34 r2d2 kernel: saa7115: set audio: 0x01 Dec 8 01:56:34 r2d2 kernel: saa7127: Setting Encoder Video Standard Dec 8 01:56:34 r2d2 kernel: saa7127: Set PAL Video Mode Dec 8 01:56:34 r2d2 kernel: saa7127: Selecting PAL video Standard Dec 8 01:56:34 r2d2 kernel: ivtv: Initialized WinTV PVR 350, card #0 Dec 8 01:56:34 r2d2 kernel: ivtv: ==================== END INIT IVTV ==================== Dec 8 01:56:34 r2d2 kernel: ivtv: i2c attach [client=Hauppauge IR,ok] Dec 8 01:56:34 r2d2 kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Dec 8 01:57:31 r2d2 kernel: saa7115: status: 0xc0 Dec 8 01:57:39 r2d2 kernel: saa7115: decoder set picture bright=128 contrast=64 saturation=64 hue=0 Dec 8 01:57:39 r2d2 last message repeated 3 times Dec 8 01:57:39 r2d2 kernel: saa7115: decoder disable output Dec 8 01:57:39 r2d2 kernel: saa7115: decoder set input (0) Dec 8 01:57:39 r2d2 kernel: saa7115: now setting Composite input Dec 8 01:57:39 r2d2 kernel: ivtv: Setting audio matrix to input 1, output 1 Dec 8 01:57:39 r2d2 kernel: saa7115: decoder enable output Dec 8 01:57:39 r2d2 kernel: ivtv: Switching standard to NTSC. Dec 8 01:57:39 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:57:40 r2d2 kernel: saa7115: decoder set norm NTSC Dec 8 01:57:40 r2d2 kernel: saa7115: set audio: 0x01 Dec 8 01:57:40 r2d2 kernel: saa7127: Setting Encoder Video Standard Dec 8 01:57:40 r2d2 kernel: saa7127: Set NTSC Video Mode Dec 8 01:57:40 r2d2 kernel: saa7127: Selecting NTSC video Standard Dec 8 01:57:40 r2d2 kernel: saa7115: decoder disable output Dec 8 01:57:40 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:57:40 r2d2 kernel: saa7115: decoder enable output Dec 8 01:57:40 r2d2 kernel: ivtv: Switching standard to PAL. Dec 8 01:57:40 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:57:40 r2d2 kernel: saa7115: decoder set norm PAL Dec 8 01:57:40 r2d2 kernel: saa7115: set audio: 0x01 Dec 8 01:57:40 r2d2 kernel: saa7127: Setting Encoder Video Standard Dec 8 01:57:40 r2d2 kernel: saa7127: Set PAL Video Mode Dec 8 01:57:40 r2d2 kernel: saa7127: Selecting PAL video Standard Dec 8 01:57:41 r2d2 kernel: saa7115: status: 0xc0 Dec 8 01:57:41 r2d2 kernel: saa7115: decoder disable output Dec 8 01:57:41 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! Dec 8 01:57:41 r2d2 kernel: saa7115: decoder enable output Dec 8 01:57:41 r2d2 kernel: saa7115: status: 0xc0 Dec 8 01:57:41 r2d2 kernel: saa7115: decoder disable output Dec 8 01:57:41 r2d2 kernel: ivtv: i2c client addr: 0x61 not found! : : Any ideas? -Frode -- ^ Frode Tennebø | email: [EMAIL PROTECTED] | [EMAIL PROTECTED] ^ | with Standard.Disclaimer; use Standard.Disclaimer; | ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Ivtv-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/ivtv-users
