That's great!
This part of the ivtv system was poorly documented when I did my setup last August, and I guess it's still not perfect yet.
Regards, -ryan
On Feb 7, 2005, at 6:22 PM, Chris wrote:
Thanks, problem solved!
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7368850 tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tuner: type set to 39 (LG NTSC (newer TAPC series)) by insmod option
Ryan Rawson wrote:
This is what I had to do:
options ivtv tuner=39 debug=0 options tuner type=39
the trick is that tuner needs to have the same type as ivtv, otherwise your tuner wont tune. hence the snow. This took me a zillion years to figure out.
-ryan
On Jan 31, 2005, at 3:03 AM, Dybdahl, Niels wrote:
Hi Chris,
The only difference, that I can see compared to my setup, is that I am
using ivtv 0.3.2 from atrpms at-testing while you are using v 0.2.0rc3
according to your logfile. It might be worth a try to test 0.3.2.
Best regards Niels
-----Original Message----- From: Chris [mailto:[EMAIL PROTECTED] Sent: 29. januar 2005 10:09 To: ivtv-users@lists.sourceforge.net Subject: Re: [Ivtv-users] ivtv module loads, plays snow
thanks very much for your feedback everyone. i might be making progress
here... i made the alias in /etc/modprobe as instructed:
alias tveeprom tveeprom-ivtv
and then: # depmod -a
i then tried to load the modules: # modprobe -r ivtv # modprobe tveeprom # modprobe ivtv
although no errors are returned, the tveeprom module doesn't seem like
it really loads.
the prompt comes back instantly, without any pause or disk activity. i
tried the alias just before the other ivtv modules, as well as at the
first line of the file
i get the same errors in dmesg:
ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module.
i tried an arbitrary reboot, but it didn't help (hehe, that only works
on windows :)
i also tried Geir Ertzaas' suggestion for building the tveeprom module
into an initial ramdisk:
# mkinitrd -f --with=tveeprom-ivtv initrd-`uname -r`.img `uname -r` # cp
./initrd-2.6.10-1.737_FC3.img /boot/initrd-2.6.10-1.737_FC3.img
then i grep'd this in /var/log/messages: Jan 28 23:58:05 localhost kernel: tveeprom: no version for "struct_module" found: kernel tainted.
if anyone knowns where i might go from here, please drop me a line.
thanks again for taking the time to read and make suggestions folks :>
here is full ivtv output from dmesg:
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3e) loading
ivtv: Linux version: 2.6.10-1.737_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 9 (level, low) -> IRQ 9
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
ivtv: i2c client addr: 0x50 not found!
ivtv: Error -19 reading Hauppauge eeprom.
ivtv: Possible causes: the tveeprom module was not loaded, or
ivtv: the eeprom kernel module was loaded before the tveeprom module.
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter SMBus Via Pro adapter at e800 (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
msp34xx: init: chip=MSP3445G-B8 +nicam +simple +simpler +radio
mode=simple
ivtv: i2c attach [client=MSP3445G-B8,ok]
msp3410: daemon started
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 250 card with 4 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes
total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Could not detect tuner standard, defaulting to NTSC.
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
tuner: tuner type not set
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
ivtv: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: ivtv_enc_thread: pid = 6014, itv = 0xe553a5a0
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time by
over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
