On Jul 24, 2005, at 10:39 AM, Ross wrote:
I got the log to work: Jul 24 02:26:48 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Jul 24 02:26:48 localhost kernel: ivtv: version 0.2.0 (rc3j) loading Jul 24 02:26:48 localhost kernel: ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 Jul 24 02:26:48 localhost kernel: ivtv: In case of problems please include the debug info Jul 24 02:26:48 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Jul 24 02:26:48 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Jul 24 02:26:48 localhost kernel: ivtv: Autodetected WinTV PVR 150 card Jul 24 02:26:48 localhost kernel: ivtv: Found an iTVC16 based chip Jul 24 02:26:48 localhost kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Jul 24 02:26:48 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor: 0x1106 Jul 24 02:26:48 localhost kernel: tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8095215 Jul 24 02:26:48 localhost kernel: tveeprom: tuner = <unknown> (idx = 99, type = 4) Jul 24 02:26:48 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) Jul 24 02:26:48 localhost kernel: tveeprom: audio_processor = TDA9850 (type = 3) Jul 24 02:26:48 localhost kernel: ivtv: i2c attach [client=tveeprom,ok] Jul 24 02:26:48 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Jul 24 02:26:49 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Jul 24 02:26:52 localhost kernel: cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. Jul 24 02:26:52 localhost kernel: cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 Jul 24 02:26:52 localhost kernel: cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 Jul 24 02:26:52 localhost kernel: ivtv: i2c attach [client=cx25840,ok] Jul 24 02:26:52 localhost kernel: wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 Jul 24 02:26:52 localhost kernel: wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 Jul 24 02:26:52 localhost kernel: wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 Jul 24 02:26:52 localhost kernel: wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 Jul 24 02:26:52 localhost kernel: wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 Jul 24 02:26:52 localhost kernel: wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 Jul 24 02:26:52 localhost kernel: wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. Jul 24 02:26:52 localhost kernel: wm8775: Updating register 2 (R11), config: 1622 active: 1621. Jul 24 02:26:52 localhost kernel: wm8775: Updating register 3 (R12), config: 1802 active: 1902. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 7 (R16), config: 207b active: 207b. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 8 (R17), config: 2200 active: 2200. Jul 24 02:26:52 localhost kernel: wm8775: Updating register 9 (R18), config: 2432 active: 2482. Jul 24 02:26:52 localhost kernel: wm8775: Updating register 10 (R19), config: 2600 active: 2601. Jul 24 02:26:52 localhost kernel: wm8775: Skipping register 11 (R20), config: 2826 active: 2826. Jul 24 02:26:52 localhost kernel: wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. Jul 24 02:26:52 localhost kernel: ivtv: i2c attach [client=wm8775,ok] Jul 24 02:26:52 localhost kernel: ivtv: Tuner Type 4, Tuner formats 0x00001000, Radio: yes, Model 0x008d1659, Revision 0x00000000 Jul 24 02:26:52 localhost kernel: ivtv: NTSC tuner detected Jul 24 02:26:52 localhost kernel: ivtv: Radio detected Jul 24 02:26:53 localhost kernel: ivtv: Encoder revision: 0x02040024 Jul 24 02:26:53 localhost kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Jul 24 02:26:53 localhost kernel: ivtv: Configuring WinTV PVR 150 card with 5 streams Jul 24 02:26:53 localhost kernel: ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total Jul 24 02:26:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 0 minor 0 Jul 24 02:26:53 localhost kernel: ivtv: Create DMA stream 1 Jul 24 02:26:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 1 minor 32 Jul 24 02:26:53 localhost kernel: ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total Jul 24 02:26:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 2 minor 224 Jul 24 02:26:53 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total Jul 24 02:26:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 3 minor 24 Jul 24 02:26:53 localhost kernel: ivtv: Create stream 4 Jul 24 02:26:53 localhost kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 Jul 24 02:26:53 localhost kernel: ivtv: Setting Tuner 4 Jul 24 02:26:53 localhost kernel: tuner: type set to 4 (NoTuner) by ivtv i2c driver #0 Jul 24 02:26:53 localhost kernel: ivtv: Switching standard to NTSC. Jul 24 02:26:53 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 Jul 24 02:26:53 localhost kernel: ivtv: ==================== END INIT IVTV ==================== Thanks! KG |
- [Ivtv-users] PVR-150 Tuning Problem hydrateordie
- Re: [Ivtv-users] PVR-150 Tuning Problem Ross
- Re: [Ivtv-users] PVR-150 Tuning Problem hydrateordie
- Re: [Ivtv-users] PVR-150 Tuning Problem hydrateordie