Hi all, On 5/12/19 9:51 AM, Jan Kiszka wrote: > On 10.05.19 15:11, [email protected] wrote: >> Hello everyone, >> >> I'm still trying to get my rootCell running. I have for the moment >> connected a serial port in order to have the logs in full (in ssh the >> communication was down before I could have the logs). After solving >> some minor errors (such as Invalid MMIO/RAM read or IO-port) I find >> myself with an error that I can't explain: >> >> >> VT-d fault event reported by IOMMU 1: >> Source Identifier (bus:dev.func): 03:00.0 >> Fault Reason: 0x22 Fault Info: 38000000000 Type 0 >> VT-d fault event reported by IOMMU 1: >> Source Identifier (bus:dev.func): 03:00.0 >> Fault Reason: 0x22 Fault Info: 3c000000000 Type 0 >> VT-d fault event reported by IOMMU 1: >> Source Identifier (bus:dev.func): 03:00.0 >> Fault Reason: 0x22 Fault Info: 39000000000 Type 0 >> VT-d fault event reported by IOMMU 1: >> Source Identifier (bus:dev.func): 03:00.0 >> Fault Reason: 0x22 Fault Info: 3b000000000 Type 0
hmm, sounds familiar. On a Dell T440, we have the *exact* same issue with a similar card: a BCM5720, pretty similar to your BCM5719. See my thread "VT-d: IOMMU exception with unknown fault reason"). And yes, there we have an active link on it. >> >> >> Is the new sysfs-parser.py the cause of my trouble or is there >> anything I missed in the configuration ? > > Could be. 0x22 means that the device is not present in the interrupt We have no modifications of the sysfs parser and face the same issue. > remapping > table of IOMMU that is responsible for that device. Try changing the .iommu > number for that device from 0 to 1 or the other way around. Or is there > no entry > for 03:00.0 at all? Jeanne, were you already able to solve this issue? I manually parsed (my) DMAR, and there's a ATSR structure (type 0x2) which is ignored by the config parser. Could this be related to this issue or can it simply be ignored? In this system, we have four iommus. Mario, did you already test all possibilities for .iommu (0, 1, 2, 3)? Ralf > > Jan > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/1300fb12-e2eb-1a10-e950-9f7c94e1071b%40oth-regensburg.de. For more options, visit https://groups.google.com/d/optout.
