On 9 Oct 2008, at 20:44 , Rob Hamerling wrote:

>>> verification failure: different data at address 300000: file=FF
>> Three times in a row. I have seen this before.
> Ah, those damned fuses again .... always troublesome.

> As programmer I use mainly a Wisp648 with my own version of Xwisp
> (Xwisp2). Xwisp2 has for every supported PIC masks to correct the hex
> file for fuse bits which are always 0 or always 1 when read back from
> the device. This ensures that the verify works properly.
> This feature of Xwisp2 explains that I do not have troubles with the
> fuses. But Wouter's Xwisp seems not to have that feature, which  
> explains
> you may get verify errors.

I get it.

> Browsing through some datasets it may be better to set the default for
> the 18F fuse bits to zero. Would you be so kind to test with a copy of
> the 18F4620 device file (or any other giving similar trouble) with all
> fuse bytes changed to 0x00?
With the 18F4550, that introduces NEW errors:

> G5-fiwihex:~/jalv2/jallib/unvalidated/sample/by_device/18f4550 eur$  
> xw go b18f4550.hex
> XWisp 1.30, command line mode
> hardware: Wisp628 1.23 (fast) (wisp648 firmware)
> target: 18f4550, device code 1200 revision bits 02
>
> verification failure: different data at address 30000C: file=0  
> target=3
> ERROR


It does not help with the 18F4620:

> G5-fiwihex:~/jalv2/jallib/unvalidated/sample/by_device/18f4620 eur$  
> xw go b18f4620.hex
> XWisp 1.30, command line mode
> hardware: Wisp628 1.23 (fast) (wisp648 firmware)
> target: 18f4620, device code 0C00 revision bits 06
>
> verification failure: different data at address 30000C: file=0  
> target=F
> ERROR



> I must investigate if I can migrate the masks from Xwisp2 to the
> 'devicespecific.cmd' script for the device files with not to much  
> work.
> That would mean that about 2/3 of all the device files get an  
> individual
> fuse pattern. The remaining PICs must wait until I have collected  
> their
> patterns: datasheet reading again....

We'll do only the PICs that we have for now.

This means 5..10 18F device files.


---
ir EE van Andel [EMAIL PROTECTED]  http://www.fiwihex.nl
Fiwihex B.V. Wierdensestraat 74, NL7604BK Almelo, Netherlands
tel+31-546-491106 fax+31-546-491107



--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to