Joep Suijs wrote:
> 2008/10/11, Rob Hamerling <[EMAIL PROTECTED]>:
>> I have done some tests with the Wisp648 programmer and Xwisp software as
>> delivered by Voti (I normally use my improved variants of these). I
>> could reproduce Eur's problems with the current device files and these
>> were gone with the new device files with individual PIC-specific default
>> fuse bits settings.
>>
> Great!
> 
> BTW, I could borrow a board with 16f77 on the club and managed to get
> a blinking led with the device files of this morning. An other one
> down :)

Thanks! But FYI:
1. I did not refresh the device files yet! I was waiting for a report of 
Eur, but I have now done some tests myself with positive results. So 
I'll commit 'm probebly tonight.
2. The problem of Eur was with the 18F series. This is because the 18Fs 
have mostly "unused bits read as 0" while the default setting in the 
device files was '1'. The baseline and midrange have mostly "unused bits 
read as 1", which matches the default setting! Apart from that the 18F 
have much more unused fuse bits, so the chances on a verify 'error' are 
higher.

Regards, Rob.

-
Rob Hamerling, Vianen, NL (http://www.robh.nl/)

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to