Hi Rob, I adapted the program slightly to support my setup on an 16f428a and it runs okay. And it also runs okay with an 16f88 on the same board. Combine the next two files: include board_16f88_js include test_hello_world_lcd give an incrementing hex counter.
The difference is that I have a smaller display (16x2) and a different pin-out. I think it is up to you to see where it goes wrong since you have the setup that has the problem. And my feeling is that it is something you overlooked or it is within the compiler. And at least the last one is nice to know, so Kyle can fix it! Joep 2008/10/25, Rob Hamerling <[EMAIL PROTECTED]>: > > > > Joep Suijs wrote: > > > Just dug up my old print.jal test program and this outputs D2 for decimal > > 210. > > It is not an extensive test, but at least something works ;-) > > > > What file are you exactly trying, so I can reproduce the issue? > > See the 'hello_world_lcd.jal' in ..unvalidated/sample/by_device/16f88 > (or 16f690). It uses print_byte_dec() because that works properly, but > with print_byte_hex() I see only '00' as output. > > Regards, Rob. > > > -- > Rob Hamerling, Vianen, NL (http://www.robh.nl/) > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
