:) Are you left-handed ? Seb (left-handed...)
Hi, > > Enclosed a draft schematics of the circuit I build. > > Notes: > - the 8 pin connector on the left is my icp connector. And pin one, > two and four (ground, 5v and serial) connect to the main pic. > - the 5-pin connector is my i2c standard connector. It can feed on 5v > (pin 4) or >7V (pin 5) > - the backlight circuit is not tested yet > - an 100n capacitor close to the pic should be added. > - a resistor to pin 8 (don't recall if it is pull up or down) could be > added to avoid LVP related problems. > - a led on +5v and/or one on pin 3, 15 or 16 could be added (but I am > not sure pin 3 is a full-functional output pin). > > Joep > > > > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
