Sounds okay.

- i'd prefere a sil iscp and won't use the rj* one
- please add power supply (+5v) to the serial/i2c connector, so the
board can be connected using this one connector.

Joep

PS board_16f88_sil.jal descricbes the pins I used (just saw I missed
the rs/e pin numbers).



2009/3/9 Richard <[email protected]>:
>
> Thanks for your schematic, i will make a nice drawing and add some
> furthers like
> serial/i2c combined connector selected with jumper.
> 3 kinds of lcd connectors (2 hd44780, 2x5 and 1x16, and 1 dogm)  if
> possible (try to make a single side pcb and a minimum of via’s) .
> mosfet controlled backlight.
> 1x5 sil for iscp  or do you want a RJ11 6/6 connector like ICD2 from
> microchip or both or a complete different one?.
> If possible I will use some good to be handled smd components.
> And of course own 5Volt stabilized power.
>
> if somebody have more ideas please let me know.
>
> Richard
>
> On Mar 9, 9:53 pm, Joep Suijs <[email protected]> wrote:
>> Hi,
>>
>> Enclosed a draft schematics of the circuit I build.
>>
>> Notes:
>> - the 8 pin connector on the left is my icp connector. And pin one,
>> two and four (ground, 5v and serial) connect to the main pic.
>> - the 5-pin connector is my i2c standard connector. It can feed on 5v
>> (pin 4) or >7V (pin 5)
>> - the backlight circuit is not tested yet
>> - an 100n capacitor close to the pic should be added.
>> - a resistor to pin 8 (don't recall if it is pull up or down) could be
>> added to avoid LVP related problems.
>> - a led on +5v and/or one on pin 3, 15 or 16 could be added (but I am
>> not sure pin 3 is a full-functional output pin).
>>
>> Joep
>>
>>  Scan10003.jpg
>> 132KViewDownload
> >
>

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to