No, but I could have been a docter (MD, that is) as far as my handwriting is concerned ;)
2009/3/9 Sebastien Lelong <[email protected]>: > :) Are you left-handed ? > > Seb (left-handed...) > > >> Hi, >> >> Enclosed a draft schematics of the circuit I build. >> >> Notes: >> - the 8 pin connector on the left is my icp connector. And pin one, >> two and four (ground, 5v and serial) connect to the main pic. >> - the 5-pin connector is my i2c standard connector. It can feed on 5v >> (pin 4) or >7V (pin 5) >> - the backlight circuit is not tested yet >> - an 100n capacitor close to the pic should be added. >> - a resistor to pin 8 (don't recall if it is pull up or down) could be >> added to avoid LVP related problems. >> - a led on +5v and/or one on pin 3, 15 or 16 could be added (but I am >> not sure pin 3 is a full-functional output pin). >> >> Joep >> >> > > > > -- > Sébastien Lelong > http://www.sirloon.net > http://sirbot.org > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
