Errrr...... I printed it the wrong way (upside down), one connector is on the wrong place. I can't build this shield right now... :[
Seb -- Sébastien Lelong http://www.sirloon.net http://sirbot.org 2009/9/12 Sebastien Lelong <[email protected]> > Hi Richard, > > > >> Very nice board, but I think it’s better to make the lines as short as >> possible instead of trying to create as much ground planes as >> possible, >> > > OK. I placed headers, and clicked autorouting, resulting in this... :) > > >> You don’t need the via, create without via’s as big as possible ground >> plane. >> > > OK, I already printed the PCB, but I won't connect vias. > > >> This is more for keeping your ets flowed longer good than it is for >> avoiding interference between wires. >> You also don’t need to connect ground to extra pins, don’t make it >> unnecessary complex. > > >> It was smart to turn your arduino connectors and thereby lose the >> via’s :-) >> > > Simplified a lot the PCB... > > As I said, I've already printed the PCB (and won't access laser printer for > days), and may build Styx shield this WE. Clearly this is not the perfect > shield, but more like a Proof Of Concept / POC (and also take photos of > Jaluino with a shield :)). If it reveals interesting, we may improve the > design as needed. > > > Cheers, > Seb > -- > Sébastien Lelong > g > http://www.sirloon.net > http://sirbot.org > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
