Greetings Vasile, What a nice idea, and a good looking board with a lot of nice features!
I'd love to hear more about the ethernet feature. What would be the shipping cost to USA, for example, zip code 35951? Choose the cheapest option that is convenient for you. Perhaps some of us in North America could share the shipping cost. Thank you, William On Nov 26, 7:42 am, vasile surducan <[email protected]> wrote: > Hi, > > As a recognise of your work, I'm offering for free (excluding postage to > North or South America, Australia, Africa, North Pole or similar locations) > to all interested jallib developers (which has posted one functional library > ) the SMD evaluation board in the attached pictures. > There is only one impediment, vias must be made manually as well the SMD > soldering (but this can be a good exercise, isn't it?) > If someone is interested let me know to post also the schematics. What > the board can do ? > I almost forgot, it'a an old project, but I think: > - one 28pin DIP or SO, PIC microcontroller > - 2x8 LCD display > - SD card > - USB/RS232 converter > - ethernet controller > - keypad > - 1wire bus or SHT sensor connector > - ICSP connector > - one open collector connector > > Some of the features above can't be used simultaneously, however the board > is hardware reconfigurable using zero SMD resistors. > Board dimensions: 116x61mm. It's fit in a case dimensions of 70x120x40mm. > If you have a common wish (meaning board slighty modifications) it can be > done. > The ugly copper colour is because of the oxidation. > > best wishes, > > Vasile > > case- top.jpg > 479KViewDownload > > case-ethernet_USB.jpg > 405KViewDownload > > pcb bottom view.jpg > 555KViewDownload > > pcb top view.jpg > 515KViewDownload > > side view.jpg > 339KViewDownload > > stuffed-bottom.jpg > 520KViewDownload > > stuffed-top.jpg > 463KViewDownload -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
