Joep (memory optimization) and you are finding weird things these days.... Cheers, Seb
2010/1/27 Rob Hamerling <[email protected]> > > FYI. I finally got a blinking led with the 18f6722 by using a delay > procedure in stead of inline _usec_delay(). And after some more shuffling I > could narrow down the problem to a single NOP! When I add a NOP at a certain > point the led stops blinking on the 18f6722! Surprisingly enough this hex > file works fine on an 18f6310 and 18f6520! > I've reported my observations and analysis to Kyle. > > Regards, Rob. > > > > Rob Hamerling wrote: > >> I have a very peculiar problem.. >> The Jallib blink-a-led sample program for the 18f6722 doesn't work >> (anymore) on my test board. >> 1. on the same board the blink samples for the 18f6310 and 18f6520 >> work fine >> 2. a sample for the lcd library which works fine too, including the >> blinking of the same led on pin_A0! >> I have stripped down the lcd sample to a minimum and make it resemble the >> blink sample as closely as possible. All lcd activity has been removed >> except lcd_init(). When I remove the lcd_init() the led stops blinking! >> > > > -- > Rob Hamerling, Vianen, NL (http://www.robh.nl/) > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<jallib%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
