HI MIke, Search on vctxo. There are many different ones: frequency, analog or digital output, 3v3 or 5v etc.Most are cheap only 10MHz are expensive, I payed $17. There is one sellling a 10-lot at $9.99, but only ships within US...
Good point to take the absence of GSP signal into account. Would it be usefull to measure the temperature of the oscillator and compensate for it (instead of oven)? Joep 2010/3/7 m...@watty <[email protected]>: > > > On Mar 7, 5:04 pm, Joep Suijs <[email protected]> wrote: >> Interesting subject :) > >> >> I bought a 10 MHz vcxo on ebay and wait for it to arrive. I intend to >> lock it on the asynchrone output of a cheap GPS. >> Joep > > 1) Where on eBay? I would like some and they are €40 one off at > Farnell, but same part is in €20 3GHz frequency counter. > > 2) I used surface mount part on an 8 pin IC socket to make it DIL.. > Upside down and small wire links. I only have one and need more. > > 3) What you want is a PIC to read the GPS and adjust the control. > store that in EEPROM and then you only need to plug in the TTL GPS > occasionally, as the GPS only works near window. Run the PIC off the > TCXO and then it can accurately compare itself with GPS when available > and create adjustment to TXCO. > > Oven units are bulky and power hungry and over €100. For many > applications the occasionally corrected (with stored correction) TXCO > will be good. Based on price of the Frequency Counter *SOMEONE* must > be selling TCXO for under $5? > > Here in Ireland there is a Wireless Broadband that uses beacon on Mast > so that subscriber unit needs no Oven (TXCO not good enough for a > 10.6GHz Transmitter). The hilltops have 10.252 GHz beacon based on > €200 oven crystal. Free frequency standard if you have a 10.2GHz > receiver locked to it! > Customer Premises part http://www.ogierelectronics.com/broadband_solutions.php > (my 8Mbps down 1Mbps up 20ms BB comes nearly 13km wireless duplex > 10.2/10.6GHz by this). > > > > > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
