Hi Eur,
Thanks for the suggestions, but they may be too small to go through PCB and
plug onto IC socket. I was maybe thinking about this:
http://fr.digikey.com/1/1/2094-28-pin-tin-ww-ic-socket-c8128-04.html
I could plug it though the PCB, plug into IC socket, solder on top, then on
bottom (so plugging/removing cuckoo won't damage PCB tracks), then cut the
remaining plastic.
Prohibitive price though...
Cheers,
Seb
2010/8/27 Eur van Andel <[email protected]>
> On 24 Aug 2010, at 16:02 , Sebastien Lelong wrote:
>
> Hi guys,
>
> Some more progress on Cuckoo's nest... I've built my first Cuckoo, thanks
> to Vasile Sir Ducan who kindly sent me CNC-made PCBs. Here's a page showing
> my trials (this is only about assembly):
>
>
> http://justanotherlanguage.org/content/jaluino/blog/cuckoo-first-surgery
>
> The main problem I have is the pin headers I use: they hardly plug onto
> Atmega socket. I'd need some smaller pins, maybe less rigid but can't find
> something in my toolbox. If you have any idea, please comment !
>
>
> There are low-profile chip sockets like this:
>
> http://nl.farnell.com/harwin/d01f6020001/socket-sil-on-carrier/dp/519959
>
> You press these in 1mm holes and you can still remove the PIC. €0.23 per
> pin.
>
> Ø 0.5mm pins:
>
> http://nl.farnell.com/harwin/d01-9923246/header-1row-32way/dp/1022218
>
> €0.10 per pin
>
>
>
>
> ---
>
> ir EE van Andel [email protected] http://www.fiwihex.nl
>
> Fiwihex B.V. Wierdensestraat 74, NL7604BK Almelo, Netherlands
>
> tel+31-546-491106 fax+31-546-491107
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected]<jallib%[email protected]>
> .
> For more options, visit this group at
> http://groups.google.com/group/jallib?hl=en.
>
--
Sébastien Lelong
http://www.sirloon.net
http://sirbot.org
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
