Hi Seb,
On 2010/11/10 07:41, Sebastien Lelong wrote:
Yes, I can update unittests with all new values. Are all correct ?
I've checked the results (not so straight forward!) and as far as I've seen the calcuated results are correct.
The explanation for the differences is that the old adc_clock tested from large to small Tad values and compared if Tad was below upper limit, while the new procedure tests from small to large values and checks if Tad is above lower limit. Since the allowed range for Tad is 1.6 .. 6.0 usec there can be 2 values within this interval (for example 2.0 and 4.0). The old library took the higher value, while the new one takes the lower value.
Regards, Rob. -- R. Hamerling, Netherlands --- http://www.robh.nl -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
