Hi guys,
I had a look in TORELEASE and discovered the missing
constants_jallib.jal, which I repaired, but I found also some other
discrepancies:
770. Missing file: k:/jallib/sample/16f88_serial_sw_echo.jal
977. Missing file: k:/jallib/sample/18f452_fat32_pata_hard_disk.jal
978. Missing file: k:/jallib/sample/18f452_fat32_sd_card.jal
980. Missing file:
k:/jallib/sample/18f452_mp3_decoder_sta015_pata_hard_disk.jal
981. Missing file: k:/jallib/sample/18f452_mp3_decoder_sta015_sd_card.jal
1049. Missing file:
k:/jallib/sample/18f4620_mp3_decoder_sta015_pata_hard_disk.jal
1050. Missing file: k:/jallib/sample/18f4620_mp3_decoder_sta015_sd_card.jal
Looks like these samples were removed but left listed in TORELEASE.
Either these files must be restored or removed from TORELEASE.
There are also 45 unreleased samples (+ 53 blink-a-led samples).
These blink samples are not released because the corresponding device
file is not releases (mostly because there is no datasheet available),
but what is the reason that the other samples are not released? I would
think 'normal' samples should only be added when tested and proved to
work, and then these can be safely added to TORELEASE.
Regards, Rob.
--
R. Hamerling, Netherlands --- http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
