I renamed many of my samples and was not sure which ones after I had done it. I'll clean up mine. Rob, can you please also show me what samples are not in to release?
I made my own sample generator. Windows only, sorry. If anyone wishes to try it out, let me know. Matt. On Nov 22, 8:01 am, Rob Hamerling <[email protected]> wrote: > Hello Joep, > > On 2010/11/21 10:19, Joep Suijs wrote: > > > > > 2010/11/21 Rob Hamerling<[email protected]> > >> I would think 'normal' samples should only be added when tested and proved > >> to work, and then these can be safely added to TORELEASE. > > > Iirc, we've discussed this before. > > Many samples are generated from a test-file and a board file. Each > > test-file is tested on a (at least one) specific board and board-files > > are also tested with at least one test-file. Also, all samples > > compile. So probably most samples wil work, but many combinations are > > not verified. If this is not good enough, we should stop using > > generated samples. > > I didn't say that. On the contrary, I suggested to add untested samples > to TORELEASE when you are sufficiently confident that the combination > will work (because the same library worked at least one other board). > > Regards, Rob. > > -- > R. Hamerling, Netherlands ---http://www.robh.nl -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
