Hi Seb, When I have the RFM70 running I will measure and compare the power- currents Of the two types of modules. From the spec's I know, that low us of power got attention in the design of the module.
Henk On 18 mrt, 14:20, Sebastien Lelong <[email protected]> wrote: > Hi Henk, > > 2011/3/17 Henk van Broekhuyzen <[email protected]> > > > Summary: [RFM70] Not compatible with RFM12, much higher data-rate, more > > functionality in the module > > so less in the control software. But: A lot to study and understand to > > program the driver, > > and because of different antennas, the range may be less than for the > > RFM12B. > > Does this also mean RFM70 consumes more, thus less suitable for > embedded/battery-powered application ? > > When finishes and successfull I will let the community know. > > > > Thanks ! > > PS: I had a very quick look to all of your project, I hope to find some more > time to get back to you with more details and questions, in order to know > how we can integrate this to jallib repos. > > Cheers, > Seb > > > > > On 16 mrt, 02:37, William <[email protected]> wrote: > > > Hi Henk, > > > > On Mar 15, 1:10 pm, Henk van Broekhuyzen > > > > <[email protected]> wrote: > > > > Direct link zip file:http://www.henkzelf.nl/PICprojects/tstRF12B.zip > > > > Direct link doc from zip in html: > >http://www.henkzelf.nl/PICprojects/HZ_RF12B.html. > > > > Very nice project and write-up! Can you confirm, you're using the > > > RFM12B? Note I included the letter "M" between the "RF" and the > > > "12B" ? > > > > The reason I ask, it would be fun to try and communicate between > > > picmicros running JAL and my JeeNode (Arduino clone w/ radio). > > > > You can read more about JeeNodes here:http://jeelabs.com/ > > > > Which frequencies do you use? I bought my nodes from a USA re-seller > > > and he has a chart showing different options here: > >http://shop.moderndevice.com/products/jeenode-kit > > > > Thank you, > > > > William- Tekst uit oorspronkelijk bericht niet weergeven - > > - Tekst uit oorspronkelijk bericht weergeven - -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
