Hi Vasile,
Some feedback....
On 03/27/2016 03:22 PM, Vasile Surducan wrote:
Thanks to your email I've took a look to the 16F1765 and I was scared
about it's complexity. Die temperature measurement, zero crossing
detector, OPA, DAC, ADC, slope generator, internal modules routed to
pins via PPS pheripheral...there are a lot of places for mistakes.
I must report that the I2C libraries work fine with the 16f1765!
My problem was with PPS! I trusted my extension of the PPS library with
support for the enhanced midrange PICs. I had tested this with a
16f1708, but now I found out that the 16f1765 uses a different bit
pattern for the selection of the SDA and SCL output signals (and
probably other signals as well). With the correct selection patterns the
I2C works as expected. The PPS library requires a revision.
Regards, Rob.
--
*Rob H*amerling - http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/jallib.
For more options, visit https://groups.google.com/d/optout.
