Rob, You are good! Congratulations! Vasile
On Thu, Mar 31, 2016 at 11:03 AM, Rob Hamerling <[email protected]> wrote: > > Hi Vasile, > > Some feedback.... > > On 03/27/2016 03:22 PM, Vasile Surducan wrote: > >> >> Thanks to your email I've took a look to the 16F1765 and I was scared >> about it's complexity. Die temperature measurement, zero crossing detector, >> OPA, DAC, ADC, slope generator, internal modules routed to pins via PPS >> pheripheral...there are a lot of places for mistakes. >> > I must report that the I2C libraries work fine with the 16f1765! > My problem was with PPS! I trusted my extension of the PPS library with > support for the enhanced midrange PICs. I had tested this with a 16f1708, > but now I found out that the 16f1765 uses a different bit pattern for the > selection of the SDA and SCL output signals (and probably other signals as > well). With the correct selection patterns the I2C works as expected. > The PPS library requires a revision. > > Regards, Rob. > > -- > *Rob H*amerling - http://www.robh.nl > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/jallib. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/jallib. For more options, visit https://groups.google.com/d/optout.
