RE: Re: [jallib] Re: SNAP

[Ptr]

Hi Rob   Thanks for your answer. I don’t feel stupid anymore! I will wait for the next update of Microchip. Till then I use my good old 648. Regards, Peter   Van: Rob Hamerling Verzonden: zondag 22 maart 2020 20:10 Aan: jallib@googlegroups.com Onderwerp: Re: [jallib] Re: SNAP   Hi Rob, Peter, On 2020/03/22 16:58, Rob CJ wrote:   I did a test. I have both a Pickit3 and SNAP connected so from IPE you can select one of the two. I could reproduce your problem with V5.35 but do not understand why it does not want to select the PIC18F4455 for the SNAP. Maybe they do not yet have included all PICs.   I read in the Programming Specs of the 18F4455 (and similars) section 2.6 that entering LVP is done differently than what I have seen with many other PICs (with which only MCLR needs to be pulled low). Maybe entering LVP by controllling the PGM-pin is not supported by Snap.   Just guessing..... I could not find any info about this. Regards, Rob. -- Rob Hamerling, Vianen, NL -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to jallib+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/07707aa9-7b27-4a71-f0d0-2b30ac567caa%40gmail.com.   -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to jallib+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/5e787b97.1c69fb81.5cea8.4106%40mx.google.com.