Hi Peter, I hope that they will fix this but if I look at the investigation of Rob Hamerling I am not sure they will fix it for your specific PIC. If not you might need to switch to another PIC type...
Kind regards, Rob On Monday, March 23, 2020 at 11:31:52 PM UTC+1, Ptr wrote: > > Hi Rob CJ > > > > Thanks. Now I know for sure.As I wrote: I will keep an eye on the updates. > > > > Kind regards, > > Peter > > > > Genieten bestaat dankzij off-dagen! > > > > *Van: *Rob CJ <[email protected]> > *Verzonden: *maandag 23 maart 2020 18:30 > *Aan: *[email protected] > *Onderwerp: *Re: [jallib] Re: SNAP > > > > Hi all, > > > > I found this info in the Microchip forum. > MPLAB Snap Support > > *The MPLAB Snap In-Circuit Debugger/Programmer supports many, but not all, > PIC MCUs and dsPIC DSCs at this time. The firmware is continually being > upgraded to add support for new devices. For the most current list of > supported parts, review the latest release notes located in MPLAB X IDE . > To request device support or to report issues, email: > [email protected] <[email protected]> * > > > > > > So give it a try. > > > > Kind regards, > > > > Rob > > > > *Van:* [email protected] <[email protected]> namens Rob > Hamerling <[email protected]> > *Verzonden:* maandag 23 maart 2020 16:17 > *Aan:* [email protected] <[email protected]> > *Onderwerp:* Re: [jallib] Re: SNAP > > > > > Hello Peter, Rob and others, > > On 2020/03/23 10:04, Ptr wrote: > > > > I will wait for the next update of Microchip. > > > > > Finally I found a table which shows which devices are supported by which > tools. > The table is on my Linux system with MPLABX 5.35 in: > > > file:///opt/microchip/mplabx/v5.35/docs/Device Support.htm > > > I suppose with Windoz it will be on a similar place. > > The table shows a.o. indeed that the 18F4455 is not supported by Snap > (with this version of MPLABX). > > Regards, Rob. > > -- > *Rob H*amerling, Vianen, NL > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/be88de8e-2a0a-0b4e-9b05-c26599fef7e8%40gmail.com > > <https://groups.google.com/d/msgid/jallib/be88de8e-2a0a-0b4e-9b05-c26599fef7e8%40gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/AM0PR07MB4948F7E6BB489C0C8B634014E6F00%40AM0PR07MB4948.eurprd07.prod.outlook.com > > <https://groups.google.com/d/msgid/jallib/AM0PR07MB4948F7E6BB489C0C8B634014E6F00%40AM0PR07MB4948.eurprd07.prod.outlook.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/a48f228d-415c-4a89-b37e-f1f8a00fc22d%40googlegroups.com.
