I should have said that the file is for the pickit3. Investigation has revealed that it came from Anobium in their git repository.
Fraser On Sat, 18 Apr 2020, 10:22 Fraser Smith, <[email protected]> wrote: > I got an updated definitions file from somewhere a while back that > includes the newish 16F183xx chips I'm using and I also see the 18F4455 in > its ( binary) file. I wish I could remember where it came from. Anyway it's > attached here. It needs renaming back to pk2devicefile.dat. Worth a try. > > Cheers > > Fraser > > On Tue, 7 Apr 2020, 16:40 Rob CJ, <[email protected]> wrote: > >> Correct. >> >> I only purchased a SNAP because I could not program the newest devices >> with my Pickit3 even not in LVP mode. The Pickit3 like the Pickt4 support >> both LVP and HVP but apparently the Pickit3 does no longer support all new >> devices not in LVP and not in HVP. >> >> So if your plan is to only use devices that understand LVP then a SNAP >> would be sufficient. >> >> The only confusing part is your PIC18F4455 since in the device file you >> see LVP that can be enabled but apparently the older LVP is not the same as >> the newer LVP or Microchip has decided just simply not to support your PIC >> with SNAP like they do not support my newer PIC with Pickit3. >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens Rob >> Hamerling <[email protected]> >> *Verzonden:* dinsdag 7 april 2020 09:29 >> *Aan:* [email protected] <[email protected]> >> *Onderwerp:* Re: [jallib] Re: SNAP >> >> >> Hi Peter, >> >> On 2020/04/06 23:30, Ptr wrote: >> >> >> >> Strange: you have to buy two programmers. SNAP for LVP and Pickit4 for >> HVP. >> >> So I don’t have to look for updates for the SNAP. It’s impossible. >> >> That is not quite correct. Pickit4 supports both HVP and LVP. So if you >> buy a Pickit4 you don't need a Snap. >> >> Regads, RobH. >> >> >> -- >> *Rob H*amerling, Vianen, NL >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/8a71b478-5815-f171-4646-b45b5eab0e28%40gmail.com >> <https://groups.google.com/d/msgid/jallib/8a71b478-5815-f171-4646-b45b5eab0e28%40gmail.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/DB7PR07MB54018462AB57A643BBC3F212E6C30%40DB7PR07MB5401.eurprd07.prod.outlook.com >> <https://groups.google.com/d/msgid/jallib/DB7PR07MB54018462AB57A643BBC3F212E6C30%40DB7PR07MB5401.eurprd07.prod.outlook.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CAN856gh%2Bz3PE9TL2Kw4YAt10nT7Fnm%2BL%3DOEXBwJzX1UDRFnZOw%40mail.gmail.com.
