Hi again Kiste, Here my code pragmas;
-- Pragmas/ configuration memory settings (fuses) pragma target clock 20_000_000 -- oscillator frequency pragma target OSC OFF -- HS crystal or resonator pragma target RSTOSC HFINT32 -- power-up clock select: OSC pragma target CLKOUTEN DISABLED -- no clock output pragma target WDT DISABLED -- watchdog pragma target DEBUG DISABLED -- no debugging pragma target BROWNOUT DISABLED -- no brownout reset pragma target FCMEN DISABLED -- no clock monitoring pragma target CSWEN ENABLED -- allow writing OSCCON1 NOSC and NDIV pragma target LVP DISABLED -- no low voltage programming pragma target MCLR EXTERNAL -- external reset -- The configuration bit settings above are only a selection, sufficient -- for this program. Other programs may need more or different settings. -- WDTCON_SWDTEN = OFF -- disable watchdog -- _usec_delay (100_000) -- wait for power to stablilize -- enable_digital_io() -- make all pins digital I/O Cheers Filipe Santos. On Tuesday, May 17, 2022 at 7:05:54 PM UTC+1 Kiste wrote: > Hi Filipe, > > > I suspect the baudrate problem in settings like > > pragma target clock ? > pragma target OSC ? > pragma target RSTOSC ? > > OSCCON* = ? > > What are these settings? > > Greets, > Kiste > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/6e0906ee-c9ec-4f45-94fb-3f99356d83aen%40googlegroups.com.
