Hello, I still haven't managed to control the Pickit3 with that batch file. I have now gone back to the old way, loading the old ones with the Wisp648 and the newer one the hex with Pickit3. If I've done something wrong, I'd like to hear about it. Thank you regards Hans
Op vrijdag 29 juli 2022 om 19:14:49 UTC+2 schreef [email protected]: > Yes, we have completed that integration work. We support all the > programmers that we have always supported. We can share how we did this. > > Get Outlook for Android <https://aka.ms/AAb9ysg> > ------------------------------ > *From:* [email protected] <[email protected]> on behalf of > Rob CJ <[email protected]> > *Sent:* Friday, July 29, 2022 7:07:07 PM > > *To:* [email protected] <[email protected]> > *Subject:* Re: [jallib] Wisp648 > Hi Evan, > > Thanks for the info. I do not know GCSTUDIO so not sure how to apply it to > the question I had. > > I was just wondering if there where people that have tried some kind of > integration using Visual Studio Code with a programmer. > > I know that Sunish made a field for it but I never tried it. Maybe I > should do that first. > > Kind regards, > > Rob > > ------------------------------ > *Van:* 'Evan Venn' via jallib <[email protected]> > *Verzonden:* donderdag 28 juli 2022 20:02 > *Aan:* [email protected] <[email protected]> > *Onderwerp:* Re: [jallib] Wisp648 > > Rob, > > We can share our work with VSCode to create GCSTUDIO. We have written the > scripting interface and should you decide to leverage our work then this > may save months of work. Our development of GCSTUDIO started in January > and we are just completing (scripts, helpers, snippets, autocomplete etc > etc) > > Your call, of course. > > Get Outlook for Android <https://aka.ms/AAb9ysg> > ------------------------------ > *From:* [email protected] <[email protected]> on behalf of > Rob CJ <[email protected]> > *Sent:* Thursday, July 28, 2022 7:20:15 PM > *To:* [email protected] <[email protected]> > *Subject:* Re: [jallib] Wisp648 > > Hi all, > > I have two related questions to this subject. Sunish has made this > beautiful JAL extension for Visual Studio Code which I nowadays use for all > my JAL developments. There have been some recent updates of Visual Studio > Code that eases programming by for example detecting and indicating missing > closing brackets. > > Did anybody of you ever tried to use Visual Studio Code in combination > with a programmer using a commandl ine or script for the PICKit3? > > Normally I create my program in Visual Studio Code and compile it from > within Visual Studio code using ctrl-shift-b and I use the PICkit3 > standalone software in the 'auto reload/program' mode so that when a new > hexfile is generated it automatically reprograms my PIC. This works very > fast. > > I do believe that if I would use a command line interface and start the > programmer from Visual Studio Code that it will be slower since it needs to > restart the programmer software each time I want to use it. Or is there > another way to do that? > > Thanks > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* donderdag 28 juli 2022 15:56 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] Wisp648 > > Have tested if it works from mplab as i have done until now : (start > mplab, load hex file and program,) works perfect > > Op donderdag 28 juli 2022 om 15:50:34 UTC+2 schreef hans: > > Tested from jaledit , it opened the batch and teh same eror message : > C:\Users\Gebruiker\Desktop>"C:\Program > Files\Microchip\MPLABX\v5.45\mplab_platform\mplab_ipe\pk3cmd.exe" -TPPK3 > -Pport -MPIC -Fcom5 -OL > > Illegal command line parameter T > Press any key to continue . . . > > Op donderdag 28 juli 2022 om 13:12:20 UTC+2 schreef vasile: > > "Gefeliciteerd" > seems ok for me. :) > > BTW, if you use pickit4, you will need anyway to install the IPE to change > the supply voltage, then to plug and unplug and plug again the pickit until > IPE sees it...then fortunately to program something. Never leave it in the > USB when you start the computer if you do not want to send it to Microchip > irish office for reflashing the Atmel inside or exchanging with a new > one... Pickit4 needs to behave with it as you'll do with eggs. On the > opposite of Pickit2/3 which can be reflashed at home... > best wishes > > > On Thu, Jul 28, 2022 at 8:56 AM hans <[email protected]> wrote: > > Hi Sunish, > I have made my first batch: > > @ECHO OFF > Echo Gefeliciteerd > PAUSE > > "C:\Program > Files\Microchip\MPLABX\v5.45\mplab_platform\mplab_ipe\pk3cmd.exe" -TPPK3 > -P%1 -MPIC -F%2 -OL > @if ERRORLEVEL 1 pause > > It works but gives an error message ; > > Gefeliciteerd > Press any key to continue . . . > Illegal command line parameter T > Press any key to continue . . . > Op woensdag 27 juli 2022 om 17:16:30 UTC+2 schreef hans: > > Hi Sunish, > This sounds great ! I have never made a batch file and use the Pickit not > for providing 5 Volt\ > The IPE is in the regular program file, not in (86), i have foud the same > files you mentioned. > . Please give me an example how to make the batch file. > Thanks > Hans > > Op woensdag 27 juli 2022 om 14:24:59 UTC+2 schreef [email protected]: > > Jaledit can program using Pickit 2 and 3. You will need to install IPE. > > Create a batch file and paste the code - Change the path to reflect your > computer's IPE installation > > *"C:\Program Files > (x86)\Microchip\MPLABX\v5.20\mplab_platform\mplab_ipe\pk3cmd.exe" -TPPK3 > -P%1 -MPIC -F%2 -OL * > *@if ERRORLEVEL 1 pause* > > > In jaledit you will have to set the path to the batch file and pass %D > %F for the PIC name and file name respectively. > the /V5 is to force Pickit to provide 5V supply > > [image: image.png] > > > > Regards, > Sunish > > -- > > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/f295ac0d-880c-48b4-a78d-18fc674db5cdn%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/f295ac0d-880c-48b4-a78d-18fc674db5cdn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/0a9783db-3aca-4c6c-8d85-128ffc9589c6n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/0a9783db-3aca-4c6c-8d85-128ffc9589c6n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/GVXP195MB1637A41DDE1CD616338AA9DEE6969%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/GVXP195MB1637A41DDE1CD616338AA9DEE6969%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/CWXP265MB25186A8708F26595B33ABDAAF9969%40CWXP265MB2518.GBRP265.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/CWXP265MB25186A8708F26595B33ABDAAF9969%40CWXP265MB2518.GBRP265.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/GVXP195MB163705DDB23E9EB880FB46E5E6999%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/GVXP195MB163705DDB23E9EB880FB46E5E6999%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/8ee52c76-30cd-438a-8437-91c426ffc474n%40googlegroups.com.
