Hello Evan Yes, am using standard Pickit 2 software. Where do I find newer data base for it? Will google for it. Thanks.
Regards, Filipe Santos. On Saturday, November 26, 2022 at 12:15:47 PM UTC [email protected] wrote: > re: The chip you are trying to add. > > It uses a different protocol for the SPI communications. You will require > to make changes to the application to change from LSB SPI to MSB SPI, and, > a host of other application changes in terms of memory locations. > > The newer chips starting with the 16F18855 chip family and then the > 18FxxK40 use the different protocol. > > Options: > IPE for MPLAB 5.xx and onwards > PICKitPlus > change programmer to a North Programmer ( very fast). > > > > > > On Saturday, 26 November 2022 at 11:49:30 UTC [email protected] wrote: > >> Hi Filip, >> >> Which software are you using with your PicKit2, is that the standard >> Microchip software? >> >> I guess you need a more recent database. Did you try that? >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens flyway38 >> <[email protected]> >> *Verzonden:* zaterdag 26 november 2022 11:17 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* [jallib] Re: Help on integrating PIC16F19176 in Pickit 2 >> options >> >> Hello all, >> >> No help here? >> Tried to use PIC16F1939 as base to my PIC16F19176. >> Changed only Device ID (tried 30A0 as per datasheet and 309C as per JAL >> PIC lib) and no luck. >> Kept all other parameters as they show similar to my PIC ones (at least >> the ones I could identify). >> Pickit 2 shows warning message: "Hex File Loaded is large than device" >> Thank you very much. >> >> Regards, >> Filipe Santos. >> >> >> On Friday, November 25, 2022 at 7:37:44 PM UTC [email protected] >> wrote: >> >> See >> https://github.com/Anobium/PICKitPlus/tree/master/PickIt%20ScriptEditor >> for our editor. >> >> There are applications changes required to make the new chips. >> >> But, happy to share the editor. >> >> Evan >> >> On Friday, 25 November 2022 at 19:33:08 UTC [email protected] wrote: >> >> Hey again Evan, >> >> Thank for the input and corrections. >> Just found a "cheaper" way :D >> https://jared.geek.nz/2013/jan/adding-extra-chips-to-the-pickit-2 >> Now only need to find what's similar to my pic, in Pickit 2 original >> library. >> Thanks anyways. >> >> Greetings >> Filipe Santos. >> >> On Friday, November 25, 2022 at 7:21:42 PM UTC [email protected] >> wrote: >> >> Apologies. >> >> www.pickitplus.co.uk >> >> What works out of the box? We provide PK2 software that is fully >> supported. We are a Microchip Software Partner. >> Are you developer of what? PICKITPlus software >> That website doesn't work (server not found)...My error, see URL abouve >> Not sure how to solve my issue that way. - install our software and it >> will work. We have Windows, LX and Pi versions. We have UI version and >> command line versions. >> >> Evan >> >> >> On Friday, 25 November 2022 at 19:18:10 UTC [email protected] wrote: >> >> Hi Evan >> >> Not sure if understand correctly your text. >> What works out of the box? >> Are you developer of what? >> That website doesn't work (server not found)... >> Not sure how to solve my issue that way. >> I know I can add this PIC to Pickit 2 library. Just need some hint to >> start with. >> Thanks >> >> Filipe Santos. >> >> On Friday, November 25, 2022 at 7:01:28 PM UTC [email protected] >> wrote: >> >> Notes: As we are developing more and more. >> >> Added recently. 16F181xx, 16F171xx and the 16F188xx families of >> chips. All tested on real silicon. >> Also, recenlty. >> Resolved 18fXXQ84/Q83 issues. >> Resolve 18fXXQ43 Config value. >> Resolved K40 read error . >> Added wider support for the dsPIC30 family - tested on real silicon >> Revised all LF chips to correct voltage >> Revised :LF config with changes and corrections >> EE Erase improvements for all chips >> Added PIC18FxxJ94/3 >> Resolved Qxx Progmem issue >> Added PIC18FxxQ83/4 >> >> >> On Friday, 25 November 2022 at 18:49:36 UTC [email protected] >> wrote: >> >> Filipe it works out of the box. Along with most of the new chips. >> >> I am the developer and you can get at www.pickiplus.co.uk >> >> You will be operational and supported in a few minutes. >> >> Send me a PM and I will get you a URL that you can use to get the PK2 >> only software = less. >> >> Evan >> >> >> On Friday, 25 November 2022 at 18:46:07 UTC [email protected] wrote: >> >> Hello, >> >> Need help on this integration; PIC16F19176 into Pickit 2' s library. >> Am aware of Pickit2 Script Editor. Have already used it to integrate an >> easier one before. >> But for this on (16F19176) don't know any similar one to start with. >> Any would would be appreciated. >> Thank you very much. >> >> Kind regards, >> Filipe Santos. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/f7471761-cf82-4a36-8a2b-5af7114d672fn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/f7471761-cf82-4a36-8a2b-5af7114d672fn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/9cfc5c2b-0e46-4c2e-bafa-efc3b314264en%40googlegroups.com.
