Evan, I am a bit confused. Pickit+ is using different firmware than the original Microchip. Pickit- is using Microchip firmware and Pickit+ database.... That looks strange in my logic, but also shows that Pickit- may be somehow different than Pickit+?
On Sun 27 Nov 2022, 6:10 PM '[email protected]' via jallib < [email protected] wrote: > @Filipe > > PICKIT- developer took our database, took our ideas and now are hurting > us. I have spoken on the real issues regarding the changes made to the > database that can cause real damage to microcontrollers. > I am personally in debt regarding the development of PICKitPlus. > Please consider donating to our project even if the donation is a token > donation of a few $$. > > Evan > > On Saturday, 26 November 2022 at 20:17:34 UTC [email protected] wrote: > >> Hi again. >> >> PickitMinus is great!!! >> It has that PIC (16F19176) that am using (and many other ones) and it >> worked like a charm. >> Thank you so much Rob. >> >> Cheers, >> Filipe Santos. >> >> On Saturday, November 26, 2022 at 8:08:05 PM UTC flyway38 wrote: >> >>> Hey Vasile/ Rob. >>> >>> Thank you very much for your input. >>> Will check that options. >>> >>> Best regards, >>> Filipe Santos. >>> >>> On Saturday, November 26, 2022 at 1:32:51 PM UTC [email protected] >>> wrote: >>> >>>> Yes. Not happy that someone took our work. Very unhappy. >>>> >>>> Get Outlook for Android <https://aka.ms/AAb9ysg> >>>> ------------------------------ >>>> *From:* [email protected] <[email protected]> on behalf of >>>> flyway38 <[email protected]> >>>> *Sent:* Saturday, November 26, 2022 12:43:54 PM >>>> *To:* jallib <[email protected]> >>>> *Subject:* Re: [jallib] Re: Help on integrating PIC16F19176 in Pickit >>>> 2 options >>>> >>>> Hello Evan >>>> >>>> Yes, am using standard Pickit 2 software. >>>> Where do I find newer data base for it? >>>> Will google for it. >>>> Thanks. >>>> >>>> Regards, >>>> Filipe Santos. >>>> >>>> On Saturday, November 26, 2022 at 12:15:47 PM UTC >>>> [email protected] wrote: >>>> >>>> re: The chip you are trying to add. >>>> >>>> It uses a different protocol for the SPI communications. You will >>>> require to make changes to the application to change from LSB SPI to MSB >>>> SPI, and, a host of other application changes in terms of memory >>>> locations. >>>> >>>> The newer chips starting with the 16F18855 chip family and then the >>>> 18FxxK40 use the different protocol. >>>> >>>> Options: >>>> IPE for MPLAB 5.xx and onwards >>>> PICKitPlus >>>> change programmer to a North Programmer ( very fast). >>>> >>>> >>>> >>>> >>>> >>>> On Saturday, 26 November 2022 at 11:49:30 UTC [email protected] wrote: >>>> >>>> Hi Filip, >>>> >>>> Which software are you using with your PicKit2, is that the standard >>>> Microchip software? >>>> >>>> I guess you need a more recent database. Did you try that? >>>> >>>> Kind regards, >>>> >>>> Rob >>>> >>>> ------------------------------ >>>> *Van:* [email protected] <[email protected]> namens >>>> flyway38 <[email protected]> >>>> *Verzonden:* zaterdag 26 november 2022 11:17 >>>> *Aan:* jallib <[email protected]> >>>> *Onderwerp:* [jallib] Re: Help on integrating PIC16F19176 in Pickit 2 >>>> options >>>> >>>> Hello all, >>>> >>>> No help here? >>>> Tried to use PIC16F1939 as base to my PIC16F19176. >>>> Changed only Device ID (tried 30A0 as per datasheet and 309C as per JAL >>>> PIC lib) and no luck. >>>> Kept all other parameters as they show similar to my PIC ones (at least >>>> the ones I could identify). >>>> Pickit 2 shows warning message: "Hex File Loaded is large than device" >>>> Thank you very much. >>>> >>>> Regards, >>>> Filipe Santos. >>>> >>>> >>>> On Friday, November 25, 2022 at 7:37:44 PM UTC [email protected] >>>> wrote: >>>> >>>> See >>>> https://github.com/Anobium/PICKitPlus/tree/master/PickIt%20ScriptEditor >>>> for our editor. >>>> >>>> There are applications changes required to make the new chips. >>>> >>>> But, happy to share the editor. >>>> >>>> Evan >>>> >>>> On Friday, 25 November 2022 at 19:33:08 UTC [email protected] wrote: >>>> >>>> Hey again Evan, >>>> >>>> Thank for the input and corrections. >>>> Just found a "cheaper" way :D >>>> https://jared.geek.nz/2013/jan/adding-extra-chips-to-the-pickit-2 >>>> Now only need to find what's similar to my pic, in Pickit 2 original >>>> library. >>>> Thanks anyways. >>>> >>>> Greetings >>>> Filipe Santos. >>>> >>>> On Friday, November 25, 2022 at 7:21:42 PM UTC [email protected] >>>> wrote: >>>> >>>> Apologies. >>>> >>>> www.pickitplus.co.uk >>>> >>>> What works out of the box? We provide PK2 software that is fully >>>> supported. We are a Microchip Software Partner. >>>> Are you developer of what? PICKITPlus software >>>> That website doesn't work (server not found)...My error, see URL abouve >>>> Not sure how to solve my issue that way. - install our software and it >>>> will work. We have Windows, LX and Pi versions. We have UI version and >>>> command line versions. >>>> >>>> Evan >>>> >>>> >>>> On Friday, 25 November 2022 at 19:18:10 UTC [email protected] wrote: >>>> >>>> Hi Evan >>>> >>>> Not sure if understand correctly your text. >>>> What works out of the box? >>>> Are you developer of what? >>>> That website doesn't work (server not found)... >>>> Not sure how to solve my issue that way. >>>> I know I can add this PIC to Pickit 2 library. Just need some hint to >>>> start with. >>>> Thanks >>>> >>>> Filipe Santos. >>>> >>>> On Friday, November 25, 2022 at 7:01:28 PM UTC [email protected] >>>> wrote: >>>> >>>> Notes: As we are developing more and more. >>>> >>>> Added recently. 16F181xx, 16F171xx and the 16F188xx families of >>>> chips. All tested on real silicon. >>>> Also, recenlty. >>>> Resolved 18fXXQ84/Q83 issues. >>>> Resolve 18fXXQ43 Config value. >>>> Resolved K40 read error . >>>> Added wider support for the dsPIC30 family - tested on real silicon >>>> Revised all LF chips to correct voltage >>>> Revised :LF config with changes and corrections >>>> EE Erase improvements for all chips >>>> Added PIC18FxxJ94/3 >>>> Resolved Qxx Progmem issue >>>> Added PIC18FxxQ83/4 >>>> >>>> >>>> On Friday, 25 November 2022 at 18:49:36 UTC [email protected] >>>> wrote: >>>> >>>> Filipe it works out of the box. Along with most of the new chips. >>>> >>>> I am the developer and you can get at www.pickiplus.co.uk >>>> >>>> You will be operational and supported in a few minutes. >>>> >>>> Send me a PM and I will get you a URL that you can use to get the PK2 >>>> only software = less. >>>> >>>> Evan >>>> >>>> >>>> On Friday, 25 November 2022 at 18:46:07 UTC [email protected] wrote: >>>> >>>> Hello, >>>> >>>> Need help on this integration; PIC16F19176 into Pickit 2' s library. >>>> Am aware of Pickit2 Script Editor. Have already used it to integrate an >>>> easier one before. >>>> But for this on (16F19176) don't know any similar one to start with. >>>> Any would would be appreciated. >>>> Thank you very much. >>>> >>>> Kind regards, >>>> Filipe Santos. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "jallib" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/jallib/f7471761-cf82-4a36-8a2b-5af7114d672fn%40googlegroups.com >>>> <https://groups.google.com/d/msgid/jallib/f7471761-cf82-4a36-8a2b-5af7114d672fn%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "jallib" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/jallib/km82FdeOHcU/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/jallib/9cfc5c2b-0e46-4c2e-bafa-efc3b314264en%40googlegroups.com >>>> <https://groups.google.com/d/msgid/jallib/9cfc5c2b-0e46-4c2e-bafa-efc3b314264en%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/a4b07fee-81cb-412f-b1cd-248e677d23e6n%40googlegroups.com > <https://groups.google.com/d/msgid/jallib/a4b07fee-81cb-412f-b1cd-248e677d23e6n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CAM%2Bj4qt9qKOYnc%2B_C%2BBLoDekcUr%2BtTkjfdn3bM9w_r_qRkhiyg%40mail.gmail.com.
