Hi Jos, The PICKitplus software is software you need to purchase. If you use a newer PIC you need it. Your PIC is not so new so it should be possible to program it with the old PICKit software.
Even with PICKitplus I got sometimes the same error that you mentioned. I have two Chinese copies of the PICKit3 and one often gives this error and the other does not. There are some options you can try that worked for me: 1. Put decoupling capacitors close to your PIC. 2. Use IPE from MPLABX. For some reason that also solved the problem (maybe they use another programming algorithm). Note that you need to switch your PICKit3 then to MPLABX mode. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens jos smans <[email protected]> Verzonden: zondag 5 november 2023 19:37 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] 18f4431 problems hi EvanVenn I use software Pickit 3V 3.10 , and also jaleditV2. If PickitPlus is a newer and better program, were can i download it? Jos. Op zondag 5 november 2023 om 17:03:06 UTC+1 schreef Evan Venn: Can you share what programming software you are using with your PK3? I am the developer of PICKitPlus and we have tested this chip family. Evan ________________________________ From: [email protected] <[email protected]> on behalf of jos smans <[email protected]> Sent: 05 November 2023 13:06 To: jallib <[email protected]> Subject: [jallib] 18f4431 problems Hello, I have a problem by programming a pic 18f4431. When i make a verry simple program blink a led ,jaledit accept the HEX program, but ,when i put it in pic, error occurs on my pickit3"Programming failed at Program Memory 0x000000" I also I attempt a sample from jalib directory"18f4431_blink_HS.jal"with the same error. Can i have a litlle help? Thanks -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/77b05aac-91b9-4246-abd1-04bf83fffc56n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/77b05aac-91b9-4246-abd1-04bf83fffc56n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/0707b257-95ef-48e0-8d33-5898b03bbe3fn%40googlegroups.com<https://groups.google.com/d/msgid/jallib/0707b257-95ef-48e0-8d33-5898b03bbe3fn%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB1637578BEFDCE079AE1E964EE6AAA%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
