Hi Jos, It may still be a power problem since not all PICs are the same. Did you try using IPE from MLPABX?
Kind regards, Rob Op maandag 6 november 2023 om 12:47:34 UTC+1 schreef [email protected]: > Hello everyone, > I have programmed the same "blink a led" with Pic18f4455. By 18f4455 it > works completely. so i think it isn't the power, gnd .Maybe a software > problem? > Jos > > Op maandag 6 november 2023 om 12:14:56 UTC+1 schreef vsurducan: > >> It might be a hardware problem. Have you checked twice the connectoin >> between programmer and pic? Short cable length (20-30cm). GND cables >> between clock and data signals.Do you have correct programming and supply >> voltage? Use HV programming mode not LVP. >> >> On Sun 5 Nov 2023, 4:36 PM jos smans, <[email protected]> wrote: >> >>> Hello, I have a problem by programming a pic 18f4431. When i make a >>> verry simple program blink a led ,jaledit accept the HEX program, but >>> ,when i put it in pic, error occurs on my pickit3"Programming failed at >>> Program Memory 0x000000" >>> I also I attempt a sample from jalib directory"18f4431_blink_HS.jal"with >>> the same error. >>> Can i have a litlle help? >>> Thanks >>> >>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "jallib" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jallib/77b05aac-91b9-4246-abd1-04bf83fffc56n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/jallib/77b05aac-91b9-4246-abd1-04bf83fffc56n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/4faa9f7b-790a-40cc-a53a-fbbaf6e506f6n%40googlegroups.com.
