Hi Hans, I did not make something like this but if you use the JAL library for the HC-SR04 you need to mutiplex the output of the device and connect the multiplexed signal to the interrupt pin of the PIC.
Next to that you need also need to multiplex the trigger signal that goes to each HC-SR04 module. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Hans van Veldhuizen <[email protected]> Verzonden: zondag 9 februari 2025 17:04 Aan: jallib <[email protected]> Onderwerp: [jallib] hcsr04 3x Hello, I have tried the hc sr04 and now have something in hand that needs three such sensors at the same time. Has anyone made something like this before? greetings Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion visit https://groups.google.com/d/msgid/jallib/fe0e62b2-1bbb-43db-a9d8-50e84a814178n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/fe0e62b2-1bbb-43db-a9d8-50e84a814178n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/AM7PR02MB6098EEB30D6B0BF61CCF0D2AE6F32%40AM7PR02MB6098.eurprd02.prod.outlook.com.
