Thank you for this. I also use Avast and needed this  information. Always 
before, I just had Sighted Assistance but maybe I might be able to do it myself 
now.


http://www.facebook.com/cmckinney82
  ----- Original Message ----- 
  From: Mike & Barbara 
  To: [email protected] 
  Sent: Sunday, October 04, 2009 9:08 PM
  Subject: Re: [JAWS-Users] how to set up Avast so it works better with Jaws


  Hi Joanne,

  do the following two things to make Avast more accessible.
  Configuring Avast to not use the skins for the simple user interface:
  1. Start Avast.
  2. Wait for the memory test to be completed, then close the web page that
  appears. You should now land on a dummy check box.
  3. Press the applications key to open a context menu, down arrow to settings
  and press enter. The Programme Settings dialogue box appears, with the
  categories tree gaining focus.
  4. Tab until you hear, "enable skins for simple user interface check box
  checked". Press space to uncheck it.
  5. Tab to ok and press enter. You'll land back on the dummy check box.
  6. Close and restart Avast. You should now be able to tab through the
  controls in this programme.
  Configuring JAWS to read lists in Avast:
  1. Make sure that you're focused on the Avast Simple User Interface.
  2. Press JAWS key 6 to open Configuration Manager.
  3. Press enter to accept the New Configuration File dialogue box.
  4. Press alt s to open the set options menu, then press a. The advanced
  Options dialogue box appears.
  5. Shift tab till you hear, "Rely on MSAA for List Views check box not
  checked". Press space to check it.
  6. Press enter to activate the ok button.
  7. Either press control s to save your configuration file immediately, or
  press alt F4, pressing enter to activate the yes button on the confirm
  dialogue box.
  By doing these steps, you'll resolve an issue on some machines whereby JAWS
  stops speaking when focused on any of the lists in Avast.


  For a complete scan, check all local disks, check archives, move the slider 
  to 100% (thorough scan), and click start. For a quick scan put the slider at 
  50 percent.  Hope that helps. Take care.
  Mike



  For answers to frequently asked questions about this list visit:
  http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/

Reply via email to