You configure the serial settings on the USB-to-Serial adapter to match
those on the printer, i.e. 19200,8,n,1 for baud rate, data bits, parity and
stopbits. Match those to whatever your printer prefers.
Then, you assign it to a comm port. You will see the configuration
parameters if you go to device managers, ports and lpt, and look for your
usb-to-serial adapter there.
Steve
Lansing, MI
----- Original Message -----
From: "Mark Torgerson" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 09, 2010 6:18 PM
Subject: Re: [JAWS-Users] Trying to get a Power Braille 40 to
workwithalaptop with only USB ports
hi Steave,
Actualy, the braille blazer will use either. I just plugged in the
cereal to USB adapter and found that it shows up as an unidentified USB
device. I wonder how one assigns it to be seen as a printer?
God bless,
Mark
--
Currently in Pendleton, Eastern Oregon Regional At Pendleton, Oregon
Mostly Cloudy, 48.0°F(8.9°C) Wind:NW (310°) at 6mph (5KT)
Why are you here, and what can I do to change that?
Created by Weather Signature v1.30 • http://www.weathersig.com
God loves you!
My website HTTP://WWW.CHRISTIANTRADITIONS.INFO
Please Join my prayer list at
http://christiantraditions.info/mailman/listinfo/prayerlist_christiantraditions.info
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
