you are very welcome. *smile* A keeper in my own local packrat
archive, too. <g>
These lists are so neat because we help and learn from one another. i
never took a formal class for jaws but know all I know from either
experimentation or asking on some of these lists or just collecting
instructional posts that I thought relevant.
Warm Regards,
Doris
At 04:58 PM 3/7/2011, you wrote:
Hi Doris;
Thank you very, very much for the easy to follow steps & the graphics
labeling lesson. Definitely a keeper. Thanks again, take care.
Mike
----- Original Message -----
From: Doris and Chris
To: [email protected]
Sent: Monday, March 07, 2011 1:25 PM
Subject: [JAWS-Users] Labeling Graphics Manually - Was: Re: CCleaner not
reading check boxes
1. do
jawskey+v
to get into the temporary verbosity settings
2. hit the letter "g" until you land on "graphics"
hit your spacebar to cycle thru the different settings for graphics
until you hear "all" then hit enter.
3. in the selection multiselect, find an option whose setting you are
sure of (i.e. "checked or "unchecked')
4. route jaws to pc and put the jaws cursor on the graphics number
5. do a
jawskey+g
to invoke the grapics labeler (manual)
6. type in the graphics label you want spoken, i.e. "checked" or
"unchecked"
7. go back to the pc cursor and hit your spacebar on the selection
you just labled. the checkbox status will be toggled to the opposite
of what you just labled. repeat steps 4. to 6. above to lable the
graphic status.
I have to do the same in some other programs like autopatcher or the
old tweak-ui on 9x or 2k machines and knowning how to do this is helpful.
hth
Doris
At 04:07 PM 3/7/2011, you wrote:
>Hi Doris;
>
>I have to press the spacebar first, which either checks or unchecks the
box,
>then do a say line, then spacebar to recheck or reuncheck the box
depending
>on how I want it. I tried the Auto Graphics Labeler & that didn't help.
>How did you go about labeling these as graphics? I haven't done much
>graphics labeling so easy to follow steps would be nice. All help would
be
>graciously accepted. Thanks much, take care.
>Mike
>
> ----- Original Message -----
> From: Doris and Chris
> To: [email protected]
> Sent: Monday, March 07, 2011 12:10 PM
> Subject: Re: [JAWS-Users] CCleaner not reading check boxes
>
>
> you're lucky to have a sayline tell you the state of the checkboxes.
> I had to label mine as graphics here and have to use the jaws cursor
> to see the status of the check boxes.
>
> hth
>
> Doris
>
> At 02:55 PM 3/7/2011, you wrote:
> >Hi All;
> >
> >When in the CCleaner Tree View, is there any way to make Jaws read
>whether
> >an item / option is checked or unchecked while arrowing down this
list?
> >Currently I have to, press the spacebar and then , Jaws key + up
arrow
> >keystroke, for say line, to hear if the box is checked or not. I
would
>like
> >to be able to just arrow down the list and have Jaws read if the
boxes
>are
> >checked or not. I have played with the Windows State options in the
> >CCleaner configuration manager with no success. If anyone has a fix
for
> >this I would really like to learn about it! All advice or help will
be
> >greatly appreciated. Thanks much. Take care.
> >Mike
> >For answers to frequently asked questions about this list visit:
> >http://www.jaws-users.com/help/
> >Send any questions regarding list management to:
> >[email protected]
>
>
>
> For answers to frequently asked questions about this list visit:
> http://www.jaws-users.com/help/
> Send any questions regarding list management to:
> [email protected]
>For answers to frequently asked questions about this list visit:
>http://www.jaws-users.com/help/
>Send any questions regarding list management to:
>[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
