Hi Emailed Total recorder and here is what they said. Hello Scott Meyer, > I hooked up the cassette player using the headphone jack (the only > line out available to me)to the line in of my laptop computer.
If your record player has no "line-out" jack and is connected to your PC soundcard with a "headset" jack, then most probably you will need to use a pre-amp or connect your LP player to microphone line of your soundcard (instead of "line-in"). > but I can not hear what is being recorded. IN Professional Edition hit the Listen while capturing button (Volume and Level Panel). This button turns on/off the listen-while-capturing mode. When the mode is on, all sound captured from the sound board is sent to your speakers. Regards, High Criteria Support Team. -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Alan Robbins Sent: Sunday, February 23, 2014 8:32 AM To: [email protected] Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, Glad it is working. Not sure about hearing what you are recording as well but if you poke around a bit in some of the settings there may be a check box or something that says allow monitoring or something like that. This may allow that. The other alternative I could think of, but now you are getting into more cost, is running things through a mixer which allows various input and output device running simultaneously. I'll look a bit and see if I can find a way next time I'm in Total Recorder Also, I believe you can upgrade to 8.5 at no charge, not that this will make a difference in your current concern. Best, Al -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Scott Meyer Sent: Saturday, February 22, 2014 8:38 PM To: [email protected] Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Hi Allan it worked, Thanks, do you know how to hear what is playing, plugged in headphones in laptop and still hear nothing. Cannot use headphone jack in cassette because that is what I am using as a output source. Scott -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Alan Robbins Sent: Friday, February 21, 2014 8:08 PM To: [email protected] Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, I have Total Recorder 8.5 but I think you want to select line in as your recording input. Do you have that in the list of choices? Al Check out the new blind Handyman list at: http://cruising.ultragroups.com/mailman/listinfo/blindhandyman_cruisin g.ultragroups.com -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Scott Meyer Sent: Friday, February 21, 2014 7:20 PM To: [email protected] Subject: [JAWS-Users] Total recorder 8.4 and line in issue Hi using jaws 12 , total recorder 8.4 professional and a Samsung laptop. I want to record a cassette onto my computer (have done this with a desktop)using the microphone line (only output line available) put jack into line in on Laptop and hit play and record on Total recorder( no sound) but when I played back recording all I hear is jaws commands. like I said I did this with a desktop and never got jaws output in the recording and did not have two sound cards. What setting do I need to change . It is on software. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
