How do you get to the qat? I can't even seem to get there. On 6/11/15, Londa Peterson <[email protected]> wrote: > Hi Kimber, > There is an easier way to do this, but I can't remember it right now. What > I > did was to tab to the qat and press the applications key on each button. > There is a remove option in there. Then I went into the ribbons and found > the buttons I wanted to add. When you press the applications key on each > button, there is an "add to quick access toolbar" option in there. there's > also a custumize button at the end of the qat, but I haven't used it. Hope > this helps. > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of Kimber Gardner > Sent: Thursday, June 11, 2015 7:46 AM > To: jaws-users-list > Subject: [JAWS-Users] Modifying the quick access toolbar in word 2013 > > Hi All, > > If you don't use the qat in word you can skip this message. > > For anyone who is still reading. I got a new installation of word > recently, which means I lost the modifications I made to my quick > access toolbar. For example, I used to be able to press control 1 and > get the word count of my current document. Control 2,3,4, and 5 > allowed me to accept and reject changes. I miss these functions! > > It's been so long since I changed the qat that I forget how to do it > and googling doesn't seem to be helping very much. > > Could somebody give me a quick tutorial on modifying the qat in word > 2013? I would be grateful. > > Thanks, > Kimber > > -- > Kimberly > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ >
-- Kimberly For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
