I have several wireless access points on a remote private network that I
need to monitor. Through discussions on the list and with other jffnms
users, I have determined that the best way to do this to set up the
gateway of this network as a host and then each access point will be
represented by a TCP port interface on that host. In order to determine
if the access point is up or down I am checking the content on the port
to make sure the AP's web based configuration interface is up. The
problem I have run into is that exactly every other time the poller runs
the response is that the content is invalid, but it seems that if I run
the poller manually for this host the content is valid every time. Any
ideas on why this would be? At this time I don't have a regex
configured for it to check the content against because as I understand
it, if no regex is present it just looks for at least 20 characters to
be returned. Any help would be greatly appreciated.
--
Christian R. Talsness
Lead Technician
Wi-Fi Guys LLC.
Email : [EMAIL PROTECTED]
Main Line: (218) 353-7798
Toll Free: (877) Wi-Fi Guys (943-4489)
Direct : (414) 431-7513
Cell : (248) 842-6673
MSN IM : [EMAIL PROTECTED]
Website : www.wi-figuys.com
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
jffnms-users mailing list
jffnms-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jffnms-users
