Then I suggest that after the chrome settings are fixed, return JAWS
frame settings to their original position.
On 12/28/2015 7:46 PM, Adrian Spratt wrote:
Mike,
Good information, as usual, but users need to be aware of any
downside. In this case, turning off in-line frames will subject you to
ads that disrupt the flow as you read through articles, such as on the
New York Times website.
**
*From:*Mike B. [mailto:[email protected]]
*Sent:* Monday, December 28, 2015 6:48 PM
*To:* [email protected]
*Subject:* Chrome Menues Navigation Settings & Jaws 17
Hi All,
Running Widows 7 Pro, Chrome, & Jaws 15 thru 17 latest. When in
Chrome if
you press the, Alt key, it opens a vertical view of the menues. Well, in
J17 when I would arrow down to the, Settings Option & press enter to
open, &
here is where my problems would begin in J17. In J15 & 16 after pressing
enter on the Settings Option I can tab through all the various options
but,
with J17 I had to turn the virtual cursor off, Insert + Z, before I could
navigate through this menu. After some playing around in Jaws 17's Quick
Settings, Insert + V, I found that having these 2 settings set the way
they're shown below allowed me to navigate the Settings Menu with J17
using
the tab key just like with J15 & J16, without having to turn the virtual
cursor off. This might not work for everyone but, it worked for me &
it's
something y'all can try if you experience the same thing I encountered.
Here are the 2 settings as they should be:
Heading and Frame Options
Frame show start & end, should be checked.
In line frames show, should be on.
Hope this helps others than myself.
Take care.
Mike
