Hi Adrian, Yes, only for navigating the Chrome Settings menues when necessary. But, if you don't want to change 1 particular Jaws quick setting just for 1 menu option, you then need to remember to turn off the virtual cursor after pressing enter on the Settings menu option to be able to tab through the menu. Take care. Mike
----- Original Message ----- From: Adrian Spratt To: [email protected] Sent: Monday, December 28, 2015 8:08 PM Subject: Re: Chrome Menus Navigation Settings & Jaws 17 Yes, I see what you're getting at. For Chrome settings purposes, you want in-line frames on. for website navigation purposes, to skip past ads, you want in-line frames off. The point remains that, ideally, when we consider a suggestion to change a setting to solve one problem, we should be aware of the consequences of the change. John is correct. Obviously you can turn on in-line frames to change Chrome settings and return them to off when finished. It's just something to remember to do, and again ideally, to remember why you had a certain setting in the first place. Judging by my JAWS quick settings, the other item you mention, start/end frames, is checked by default. From: Mike B. [mailto:[email protected]] Sent: Monday, December 28, 2015 9:54 PM To: [email protected] Subject: Re: Chrome Menus Navigation Settings & Jaws 17 Hi Adrian, You don't want In line frames turned off to navigate the Settings menu, it's supposed to be on. In line frames show, should be on. Or, am I misunderstanding you? Take care. Mike ----- Original Message ----- From: Adrian Spratt To: [email protected] Sent: Monday, December 28, 2015 4:46 PM Subject: Re: Chrome Menus Navigation Settings & Jaws 17 Mike, Good information, as usual, but users need to be aware of any downside. In this case, turning off in-line frames will subject you to ads that disrupt the flow as you read through articles, such as on the New York Times website. From: Mike B. [mailto:[email protected]] Sent: Monday, December 28, 2015 6:48 PM To: [email protected] Subject: Chrome Menues Navigation Settings & Jaws 17 Hi All, Running Widows 7 Pro, Chrome, & Jaws 15 thru 17 latest. When in Chrome if you press the, Alt key, it opens a vertical view of the menues. Well, in J17 when I would arrow down to the, Settings Option & press enter to open, & here is where my problems would begin in J17. In J15 & 16 after pressing enter on the Settings Option I can tab through all the various options but, with J17 I had to turn the virtual cursor off, Insert + Z, before I could navigate through this menu. After some playing around in Jaws 17's Quick Settings, Insert + V, I found that having these 2 settings set the way they're shown below allowed me to navigate the Settings Menu with J17 using the tab key just like with J15 & J16, without having to turn the virtual cursor off. This might not work for everyone but, it worked for me & it's something y'all can try if you experience the same thing I encountered. Here are the 2 settings as they should be: Heading and Frame Options Frame show start & end, should be checked. In line frames show, should be on. Hope this helps others than myself. Take care. Mike
