Hi Adrian, You don't want In line frames turned off to navigate the Settings menu, it's supposed to be on.
In line frames show, should be on. Or, am I misunderstanding you? Take care. Mike ----- Original Message ----- From: Adrian Spratt To: [email protected] Sent: Monday, December 28, 2015 4:46 PM Subject: Re: Chrome Menus Navigation Settings & Jaws 17 Mike, Good information, as usual, but users need to be aware of any downside. In this case, turning off in-line frames will subject you to ads that disrupt the flow as you read through articles, such as on the New York Times website. From: Mike B. [mailto:[email protected]] Sent: Monday, December 28, 2015 6:48 PM To: [email protected] Subject: Chrome Menues Navigation Settings & Jaws 17 Hi All, Running Widows 7 Pro, Chrome, & Jaws 15 thru 17 latest. When in Chrome if you press the, Alt key, it opens a vertical view of the menues. Well, in J17 when I would arrow down to the, Settings Option & press enter to open, & here is where my problems would begin in J17. In J15 & 16 after pressing enter on the Settings Option I can tab through all the various options but, with J17 I had to turn the virtual cursor off, Insert + Z, before I could navigate through this menu. After some playing around in Jaws 17's Quick Settings, Insert + V, I found that having these 2 settings set the way they're shown below allowed me to navigate the Settings Menu with J17 using the tab key just like with J15 & J16, without having to turn the virtual cursor off. This might not work for everyone but, it worked for me & it's something y'all can try if you experience the same thing I encountered. Here are the 2 settings as they should be: Heading and Frame Options Frame show start & end, should be checked. In line frames show, should be on. Hope this helps others than myself. Take care. Mike
