Both. I tried the top. when that didn't work, I put it at the bottom..
Maybe I'll try again.
Tom rash
Yucaipa, california
-----Original Message-----
From: Walter Siren <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Thursday, July 15, 1999 11:05 AM
Subject: Re: How to change numlock status
>Where in your config.sys did you put that line? I was told to put it at
>the top, but that did not work, but I put it in the bottom, and then it
>worked. It can also be changed in the bios, but you will have to get a
>sighted person to do it.
>At 10:00 PM 7/14/99 -0700, you wrote:
>>I tried that and it didn't work. I'm using Windows 95. If there's an
>>answer to this question, I'd like to know.
>>Tom Rash
>>Yucaipa, california
>>-----Original Message-----
>>From: Juanita Beeson <[EMAIL PROTECTED]>
>>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>;
>>[EMAIL PROTECTED] <[EMAIL PROTECTED]>
>>Date: Wednesday, July 14, 1999 5:18 PM
>>Subject: Re: How to change numlock status
>>
>>
>>>Do you mean how to turn it off at start-up?
>>>If so, you could put a line in your config.sys file that says:
>>>
>>>numlock=off
>>>
>>>At 02:29 PM 7/14/99 -0400, [EMAIL PROTECTED] wrote:
>>>>The only way I know to change the status of the numlock key on a
permanent
>>>>basis is through the bios on C. I don't mess with that but someone else
>>>>might be able to tell you how to do so. Lynn
>>>>-
>>>>Visit the jfw ml web page: http://jfw.cjb.net
>>>>
>>>
>>>-
>>>Visit the jfw ml web page: http://jfw.cjb.net
>>>
>>
>>-
>>Visit the jfw ml web page: http://jfw.cjb.net
>>
>>
>Walter
>-
>Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
